149979
16
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
16
Technische Daten
TV-Standard PAL/SECAM BG/DK
Videoeingan PAL / SECAM / NTSC
TV-Kanäle VHF-L -E2-S6 (Meterband)
VHF-H-S7-S41(Meterband)
UHF-E21-E69 (Dezimeterband)
Antennenstecker 75 Ohm
Programmspeicher 100
Maximale Ausgangsleistung 2 W
Stromversorgung -170-245V, 50 Hz
Normalspannung 65 W
Maße / Gewicht 14”: 400 mm x 383 mm x 322 mm / 9 kg
Schnellstart
1. Legen Sie die Batterien gemäß dem Diagramm im Batteriefach in die
Fernbedienung ein.
2. Verbinden Sie das Antennenkabel mit dem Fernsehgerät.
3. Verbinden Sie das Gerät mit dem Stromnetz und schalten Sie es mit der
Taste auf der Bedienleiste vorne am Gerät EIN. Wenn der Bildschirm nicht
aufleuchtet, schalten Sie den Standby-Modus mit den Tasten
,
oder einer
Zifferntaste auf der Fernbedienung aus.
4. Halten Sie die Taste OK auf der Fernbedienung für ca. 2 Sekunden gedrückt,
bis das MENÜ auf dem Bildschirm erscheint.
5. Wählen Sie mit den Tasten
,
auf der Fernbedienung die Zeile AUTOMATISCHE
SUCHE und drücken Sie die Tasten < oder > auf der Fernbedienung. Die
Anzeige AUTOMATISCHE SUCHE erscheint auf dem Bildschirm.
6. Drücken sie die Tasten < oder > auf der Fernbedienung. Wählen Sie mit den
Tasten
,
auf der Fernbedienung die Zeile JA und drücken Sie die Taste < oder
> auf der Fernbedienung. Das Gerät beginnt nun mit der automatischen Suche
und Speicherung Ihrer lokalen TV-Sender. Dies kann einige Minuten dauern.
Nach Beendigung dieses Vorgangs erscheint das erste gespeicherte Programm
sowie die Anzeige BEARBEITEN auf dem Bildschirm. Hiermit können Sie die
Programm individuell einstellen. Näheres dazu finden Sie unter „Individuelle
Programmeinstellung“.
7. Um das MENÜ zu verlassen, drücken Sie zweimal die Taste OK auf der
Fernbedienung.
8. Mit den Tasten
,
, 0, 1, ..., 9 auf der Fernbedienung oder P+, P- auf der
Bedienleiste vorne am Gerät können Sie die Programme umschalten.
Dieses Gerät wurde nach allen zutreffenden EC-Richtlinien geprüft, wie z.B.
elektromagnetische Vertraglichkeit und Niederspannungsdirektive und wurde nach den neusten
sicherheitstechnischen Vorschriften gebaut.
Technische
Änderungen vorbehalten!
21
?
I/II
Switching on of TV
1. Remove the battery cover from the remote control unit and install two AAA (R03) type
batteries according to the diagram inside the battery compartment. Replace the battery
cover.
2. Connect your aerial to the TV set.
3. Connect your TV to a 230 V / 50 Hz AC power socket.
4. Switch on your TV with the
switch on the front panel. The red light will be illuminated.
If the screen doesn’t light up, push the button P- or P+ on the front panel of the television,
or any of the keys
,
, 0, 1, , 9 on the remote control.
Notes:
1. After switching the television set on by using
front panel button, the set switches to the
mode, what is set in the line POWER ON of the menu table OPTIONS:
- it turns on the standby mode, if it is selected. In this mode, lights up the red lamp.
- it turns on to the working state, if the LAST STATE is selected and TV was turned of
by using
front panel button from the working state.
- it turns on to the standby mode, if the LAST STATE is selected and TV was turned of
by using
front panel button from the standby mode.
2. When you turn on the TV from the standby mode to the working mode, the red lamp fades
on the front panel of television.
Switching on
Control of TV set by using MENU tables
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
In Teletext mode press to start the search of displayed page again.
In Teletext mode press to reveal hidden text (e.g. answers). Press again to hide this text.
The key which choose the groups of teletext languages.
Page expand key. In Teletext mode, press to enlarge top half of the page. Press again to
enlarge the bottom half. Press again to return to normal size.
When this button is pressed, the number of the program being received, the current time
( if set ), status of the shut down timer, settings of fixed picture parameters are shown.
Your television is controls using the MENU tables SOUND,
PICTURE, VIEW, CLOCK, AUTOSEARCH, MANUAL
SEARCH, EDIT, OPTIONS, PROGRAM TUNE, which
are shown in the screen when you push RC button OK
longer than 2 second. There are written to the separate
lines the titles of the TV parameters and their ways of the
tune up and selection in the MENU tables.
When you push the colour RC buttons, you can go directly
to MENU tables: SOUND - red, PICTURE - green, VIEW -
yellow, CLOCK - blue.
MENU table or the line of table in which is written wanting
to change or tune the parameter, is chosen by RC buttons
or
, and the active or regulation of this parameter is done by RC buttons < or >. The
MENU tables have gone from the TV screen, when you push RC button OK or TV one or
two times.
Note: the chosen line in the table is marked by cursor and the text’s colour changes.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic ctv 650 vt bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic ctv 650 vt in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info