553504
12
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
10. ALL-RESET
The display of this watch may not read correctly as a result of being subjected
to the effects of static electricity or strong impact and so forth. When this
happens, perform the procedure described in section "11. REFERENCE POSITION
ALIGNMENT" after performing the all-reset procedure described below.
1. Pull out the crown to the second click.
The second hand moves to the 0-position stored in memory and stops.
2. Continuously press button A for at least 1 second.
The second and hour hands perform a demonstration movement (forward
movement backward movement ---> forward movement). This completes the all-
reset procedure. Always make sure to perform the reference position
alignment procedure after performing all-reset.
Note:
Demonstration movement is not performed when the watch is insufficiently
charged. Perform the all-reset procedure only after charging the watch
sufficiently.
11. REFERENCE POSITION ALIGNMENT
After performing the all-reset procedure, align the second and minute hands at
their reference positions by pulling out the crown to the second click, and the
hour hand and date to their reference positions by pulling out the crown to the
first click.
1. Align the second and minute hands at the 12:00 position with the crown pulled
out to the second click.
Turning the crown to the right moves the second and minute hands forward.
Turning the crown to the left moves the second and minute hands backward.
Turning the crown continuously causes the hands to advance rapidly. Turn
the crown to the left or right to stop the hands from advancing rapidly.
Note 1:
It takes about 1 second for the watch to store the reference position
in memory. Once the reference position has been stored in memory, the second
hand will begin irregular two-second interval movement. The reference position
may not be stored in memory if the crown is operated before the start of
irregular two-second interval movement after returning the crown to the normal
position.
Note 2:
The second hand will continue to remain stopped even if the crown is
returned to the normal position unless the reference position alignment
procedure is performed.
6. After performing the reference position alignment procedure, properly reset
the time and date.
The watch shows 12:00 AM for the time of reference position alignment after
the all-reset procedure has been performed. Set the time and date by
referring to section
"4. SETTING THE TIME AND DATE”
, while being careful
not to incorrectly set AM and PM.
1. Align the date between the 31st and 1st
and the hour hand at the 12:00 position
with the crown pulled out to the first
click.
Turning the crown to the right causes
the hour hand to move forward.
Turning the crown to the left causes
the hour hand to move backward.
2. The date moves with the hour hand.
Continuously move the hour hand to set the
date between the 31st and 1st.
3. Align the hour hand at 12:00.
4. After each hand and the date have been
set, return the crown to the normal
p
osition.
Return to Table of Contents
Return to Table of Contents
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Citizen Cal B110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Citizen Cal B110 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Citizen Cal B110

Citizen Cal B110 Snelstart handleiding - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info