300954
184
Verklein
Vergroot
Pagina terug
1/325
Pagina verder
Configuring Regional Parameters and Supplementary Services
Configuring Supplementary Services (Star Codes)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 183
7
Referral Services Codes—One or more * codes can be configured into this
parameter, such as *98, or *97|*98|*123, and so forth. The maximum total
length is 79 characters.
This parameter applies when the user places the current call on hold (by
Hook Flash) and is listening to second dial tone. Each * code (and the
following valid target number according to current dial plan) entered on the
second dial-tone triggers the Cisco IP phone to perform a blind transfer to a
target number that is prepended by the service * code. For example:
- After the user dials *98, the Cisco IP phone plays a special prompt tone
while waiting for the user the enter a target number (which is validated
according to the dial plan as in normal dialing).
- When a complete number is entered, the Cisco IP phone sends a blind
REFER to the holding party with the Refer-To target equals to *98
target_number
. This feature allows the Cisco IP phone to hand off a call
to an application server to perform further processing, such as call park.
The * codes should not conflict with any of the other vertical service codes
internally processed by the Cisco IP phone. You can delete any * code that
you do not want the call server to process.
Feature Dial Services Codes: Tells the Cisco IP phone what to do when the
user is listening to the first or second dial tone.
You can configure one or more * codes into this parameter, such as *72, or
*72|*74|*67|*82, and so on. The maximum total length is 79 characters. When
the user has a dial tone (first or second dial tone), they can enter a * code
(and the following target number according to current dial plan) to trigger
the Cisco IP phone to call the target number prepended by the * code. For
example:
- After the user dials *72, the Cisco IP phone plays a special prompt tone
while waiting for the user the enter a target number (which is validated
according to the dial plan as in normal dialing).
- When a complete number is entered, the Cisco IP phone sends an
INVITE to *72
target_number
as in a normal call. This feature allows the
proxy to process features such as call forward (*72) or BLock Caller ID
(*67).
Downloaded from www.Manualslib.com manuals search engine
184

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco wip 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco wip 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info