300954
148
Verklein
Vergroot
Pagina terug
1/325
Pagina verder
Configuring Security, Quality, and Network Features
Configuring VLAN Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 147
5
QoS Resolution for LLDP-MED
If CoS is applicable and if CoS=0, the default will be used for the specific
extension as previously described. But the value shown on L2 Priority for TLV for
outgoing LLDPDU is based on value used for extension 1. If CoS is applicable and
if CoS != 0, CoS will be used for all extensions.
If DSCP (mapped to ToS) is applicable and if DSCP=0, the default will be used for
the specific extension as previously described. But the value show on DSCP for
TLV for outgoing LLDPDU is based on value used for the extension 1. If DSCP is
applicable and if DSCP != 0, DSCP will be used for all extensions.
If the VLAN > 1 and VLAN < 4095, the VLAN is set accordingly. CoS and ToS are
based on the default as previously described. DSCP is applicable.
If there is a valid network policy for voice application from LLDP-MED PDU and if
the tagged flag is set, the VLAN, L2 Priority (CoS) and DSCP (mapped to ToS) are
all applicable.
If there is a valid network policy for voice application from LLDP-MED PDU and if
the tagged flag is not set, only the DPSC (mapped to ToS) is applicable.
For the Cisco SPA525G/525G2, when the VLAN is changed, the user sees the
voice component refreshed when IP address is changed. For the Cisco SPA50X,
the phone reboots and restarts the fast start sequence.
Co-Existence with CDP
If both CDP and LLDP-MED are enabled, the network policy for the VLAN is
determined by the last policy set or changed with either one of the discovery
modes. If both LLDP-MED and CDP are enabled, during startup, the phone sends
both CDP and LLDP-MED PDUs at the same time.
Inconsistent configuration and behavior for network connectivity devices for CDP
and LLDP-MED modes could result in an oscillating rebooting behavior for the
phone due to switching to different VLANs.
If the VLAN is not set via CDP and LLDP-MED, the VLAN ID that is configured
manually is used. If the VLAN ID is not configured manually, no VLAN will be
supported. DSCP is used and the network policy is determined by LLDP-MED if
applicable.
Wireless LAN Environments
Network policy for the VLAN feature is not supported for wireless networks. The
Wireless AP or Wireless router must be enabled for LLDP-MED as the Network
Connectivity Device. The DSCP portion for network policy from Wireless AP/
Router will be supported if enabled.
Downloaded from www.Manualslib.com manuals search engine
148

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco wip 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco wip 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info