300954
143
Verklein
Vergroot
Pagina terug
1/325
Pagina verder
Configuring Security, Quality, and Network Features
Configuring VLAN Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 142
5
There is no full validation of all TLVs; TLVs that do not apply to the phones are
ignored.
Protocol state machines as stated in the standards are only used for
reference.
TLV Information
These sections provide the TLV information.
Chassis ID TLV
For the outgoing LLDPDU, the TLV supports sub-type=5 (Network Address). When
IP address is known, the value of Chassis ID is an octet of the INAN address family
number followed by the octet string for the IPv4 address used for voice
communication. If the IP address is unknown, the value for Chassis ID is 0.0.0.0.
The only INAN address family supported is IPv4. Currently, IPv6 address for the
Chassis ID is not supported. For the incoming LLDPDU, the Chassis ID is treated as
an opaque value to form MSAP identifier. The value is not validated against its sub-
type. The Chassis ID TLV is mandatory as the first TLV. Only one Chassis ID TLV is
allowed for the outgoing and incoming LLDPDUs.
Port ID TLV
For the outgoing LLDPDU, the TLV supports sub-type=3 (MAC address). The 6
octet MAC address for the Ethernet port is used for the value of Port ID in wired or
wireless mode. For the incoming LLDPDU, the Port ID TLV is treated as an opaque
value to form the MSAP identifier. The value is not validated against its sub-type.
The Port ID TLV is mandatory as the second TLV. Only one Port ID TLV is allowed
for the outgoing and incoming LLDPDUs.
Time to Live TLV
For the outgoing LLDPDU, the Time to live TTL value is 180 seconds. This is
different from 120 seconds as recommended by the standard. For the shutdown
LLDPDU, the TTL value is always 0. The Time to Live TLV is mandatory as the third
TLV. Only one Time to Live TLV is allowed for the outgoing and incoming LLDPDUs.
End of LLDPDU TLV
The value is 2-octet, all zero. This TLV is mandatory and only one is allowed for the
outgoing and incoming LLDPDUs.
Downloaded from www.Manualslib.com manuals search engine
143

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco wip 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco wip 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info