300915
83
Verklein
Vergroot
Pagina terug
1/165
Pagina verder
3-40
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
System Administration
Call Forward Busy (*90)—Call forwards on busy. Applies to primary extension only:
Cancel Call Forward Busy (*91)—Cancels call forward on busy. Applies to primary extension only.
Call Forward No Answer (*92)—Call forwards if no answer. Applies to primary extension only.
Cancel Call Forward No Answer (*93)—Cancels call forward no answer. Applies to primary
extension only.
Block Caller ID Always (*67)—Blocks caller ID on all outbound calls. Applies to all extensions.
Block Caller ID Per Call (*81)—Blocks caller ID on the next outbound call (on the current call
appearance only).
Unblock Caller ID Always (*68)—Unblocks caller ID on all outbound calls. Applies to all
extensions.
Unblock Caller ID Per Call (*82)—Unblocks caller ID on the next outbound call (on the current call
appearance only).
Secure All Calls (*16)—Defaults to prefer to use encrypted media (voice codecs).
Secure No Calls (*17)—Defaults to prefer to use unencrypted media for all outbound calls. Applies
to all extensions.
Secure Next Call (*18)—Prefers to use encrypted media for the next outbound call (on this call
appearance only).
Do Not Secure Next Call (*19)—Prefers to use unencrypted media for the next outbound call (on
this call appearance only).
Do Not Disturb (*78)—Applies to all extensions.
Cancel Do Not Disturb (*79)—Applies to all extensions.
Block Anonymous Calls—Applies to all extensions.
Cancel Block Anonymous Calls—Applies to all extensions.
Blind Transfer (*98)—This allows you to transfer a call to another person without talking to that
person:
a. Put the call on hold
b. Get a dial tone on another line
c. Call the person to whom you are transferring the call by pressing *98, followed by their
extension
d. Hang up the receiver
Prefer G.711u (*017110)—Sets preferred codec to G.711u for next outbound call.
Prefer G.711a (*017111)—Sets preferred codec to G.711a for next outbound call.
Prefer G.723 (*01723)—Sets preferred codec to G.723 for next outbound call.
Prefer G.726r16 (*0172616)—Sets preferred codec to G.726r16 for next outbound call.
Prefer G.726r24 (*0172624—Sets preferred codec to G.726r24 for next outbound call.
Prefer G.726r32 (*0172632)—Sets preferred codec to G.726r32 for next outbound call.
Prefer G.726r40 (*0172640)—Sets preferred codec to G.726r40 for next outbound call.
Prefer G.729a (*01729)—Sets preferred codec to G.729a for next outbound call.
Force G.711u (*027110)—Forces G.711u for next outbound call.
Force G.711a (*027111)—Forces G.711a for next outbound call.
Force G.723 (*02723)—Forces G.723 for next outbound call.
Force G.726r16 (*0272616)—Forces G.726r16 for next outbound call.
83

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco spa901 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco spa901 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cisco spa901

Cisco spa901 Gebruiksaanwijzing - Nederlands - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info