300915
71
Verklein
Vergroot
Pagina terug
1/165
Pagina verder
3-28
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
Using Call Features
Call Back
This service mimics the call back service offered by the PSTN. You can activate this service on a busy
number so that you are called back as soon as the busy number becomes available. The 900 Series phone
implements this feature by repeatedly dialing the busy number periodically until the called party rings
or answers, or until the service order is canceled by the user or expires. For that reason, it is referred to
as the repeat dialing service.
To activate this service, you select a line key and enters *66 (call back activation code). The 900 Series
phone then uses this call appearance to call the last called number. The retry period and expiration time
are configurable. To cancel the service, you pick up any line and enter *86. When call back service is
active, the corresponding Line key flashes green. You can still use this line to make or answer calls. The
call back service is temporarily paused until the call appearance is idle again.
When the call back number rings or answers, the call appearance rings like a normal incoming call (the
ring to be used is the default ring for the corresponding extension for that Line key). If the call back party
answers the call before the local user does, the 900 Series phone sends a holding tone to the call back
party. If the local user picks up the call back Line key first, you hear a ring back tone like a regular
outbound call.
Message Waiting Indication (MWI)
The 900 Series phone indicates message waiting in two ways:
Turning on the red MWI light - LED (with an envelope icon right above LED) on the phone.
Playing stutter tone instead of regular dial tone.
The MWI light only applies to new message indication received on Extension 1. It is not turned on or
off due to new message indication received on the other extensions [2 to 4]. On the other hand, the
900
Series phone can be configured to play a stutter tone on the individual call appearance according to
the message waiting state of the corresponding Extension X.
Accessing Voicemail
The 900 Series phone has a voicemail retrieval key for quick access to voicemail. If a voicemail access
number or URL is not specified, pressing the key brings up a screen where you can enter the appropriate
information. This information can also be entered from the web page or downloaded via provisioning.
The 900 Series phone attempts to call the voicemail number or URL if there is an idle call appearance
available.
Muting Calls
You can mute the audio input into the phone when an audio device is switched on, by pressing the MUTE
key. To un-mute, press the MUTE key again. If no audio device is on, pressing the Mute key has no
effect. When switching from the speaker phone to the handset, the phone is automatically un-muted.
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco spa901 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco spa901 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cisco spa901

Cisco spa901 Gebruiksaanwijzing - Nederlands - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info