300915
68
Verklein
Vergroot
Pagina terug
1/165
Pagina verder
3-25
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
Using Call Features
A line is selected by pressing the corresponding line key. To make or receive calls, you must select a call
appearance (line key) or an audio device. If you select a call appearance, then an audio device is selected
automatically according to user preference setting. If you select an audio device, an idle call appearance
is selected automatically in the order L1, L2, L3, and L4. You can switch between audio devices while
the call in any of the active states.
A new call appearance is selected automatically when the user presses the conf (Conf on the SPA962)
or xfer (Transfer on the SPA962) soft key. The 900
Series phone tries to pick an idle call appearance
that is on the same extension as the last active call. If that call appearance is not available, the phone
tries to pick a call appearance whose extension has the same proxy server as the last active call. Finally,
if that fails, the first idle call appearance is selected, in numeric order (L1, L2, L3, L4).
Making Calls
There are two steps in making a call:
1. Select an audio device
2. Dials the number
The Linksys IP phone lets you perform these two steps in either order. In other words, the user can select
an audio device either before or after dialing. The Linksys IP phone supports two types of dialing:
explicit or implicit. Explicit dialing occurs when the user performs one of the following actions:
Enters the target number digits one by one
Enters the speed dial assignment of the target number
Selects an entry from a directory, and presses the dial soft key
Presses a dedicated key, such as the Voice Mail key
Implicit dialing refers to dialing a highlighted entry from one of the device directories or logs. A number
can be implicitly dialing by selecting an audio device while the number is highlighted on the display.
If an audio device is selected prior to dialing, only explicit dialing is supported. Both explicit and
implicit dialing are allowed if the audio device is selected after dialing. Explicit dialing before the audio
device is selected is called on-hook dialing.
When an audio device is selected before dialing, a call appearance (for making the call) is also indirectly
selected. The 900 Series phone picks the first available call appearance, in ascending order, starting with
Line Key One. If no call appearances are available, no audio devices are selected. A call appearance can
be explicitly selected by pressing the corresponding line key. An audio device is selected automatically
based on the device programmed preferences.
Answering and Ending Calls
A line key LED rapidly blinks red when a call is incoming. You can answer the call by:
Selecting an audio device.
The 900 Series phone answers the ringing call. If there are simultaneous incoming calls, the call
ringing on the lowest numbered line key is answered.
Pressing the corresponding line key. The default audio device is automatically selected.
When a call is in the active state (not on hold or parked), the call can be ended by turning off the currently
selected audio device. A call in a standby state cannot be ended; it must be brought back to the active
state first.
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco spa901 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco spa901 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cisco spa901

Cisco spa901 Gebruiksaanwijzing - Nederlands - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info