605004
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
8
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
6: Check the PC Configuration
6: Check the PC Configuration
Each PC that is connected to the router must be configured to use the Transmission Control
Protocol/Internet Protocol (TCP/IP) and to obtain its IP address automatically. Follow these steps to
configure each PC that is running Microsoft Windows NT or Microsoft Windows 95 or 98. If the PC is
running a different version of Microsoft Windows, refer to the documentation that came with the PC.
Step 1 Start the PC, and open the Control Panel.
Step 2 Click the Network icon to display the Network window.
Step 3 Verify that TCP/IP has been added and associated with the Ethernet adapter. TCP/IP is shown as a cable
icon in the Configuration window on Microsoft Windows 95 and 98; and as a cable icon in the Protocol
window on Microsoft Windows NT. If the icon is not visible, click Add, and add Microsoft TCP/IP.
Step 4 To verify that the PC is configured to obtain an IP address automatically, click the TCP/IP cable icon,
and select the IP address tab in the TCP/IP Properties window. If it is unchecked, check Obtain an IP
address from a DHCP server. The IP address and Subnet mask fields should be grayed out.
Step 5 To accept all changes and exit this window, click OK. Then click OK in the Network window.
Step 6 If you are prompted, click Ye s to reboot the PC.
For more information on how to configure TCP/IP, refer to the Cisco Router Web Setup Troubleshooting
Guide, which is available on Cisco.com.
7: Configure the Router with Cisco Router Web Setup
The Cisco Router Web Setup (CRWS) software is loaded on the router and should be used to configure
it to connect to the Internet. The CRWS software runs on Netscape version 3.0 to 4.7, and on Internet
Explorer version 4.0 or later. Follow these steps to start the CRWS software and configure the router:
Step 1 Start, or restart, a PC connected to one of the router Ethernet ports (1, 2, 3, or 4).
Step 2 Open a web browser. Make sure that the browser is set to work in online mode.
In Internet Explorer, click the File menu, and verify that the “work offline” option is unchecked.
In Netscape, the default selection in the File menu is set to work online.
Step 3 Type in the following universal resource locator (URL):
http://10.10.10.1
The home page of the router should appear after one or two minutes.
Tip If the CRWS home page does not appear when you enter the URL http://10.10.10.1, test the connection
between the PC and the router by doing the following:
1. Check that the OK LED on the router is on, and check the cable connection between the router and
the PC. Be sure that the TO HUB/TO PC button is in the correct position. The position is correct if
the LED for the port on the front of the router is on.
2. If the CRWS home page still does not appear, verify that the web browser’s “work offline” option
is disabled.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco SOHO Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco SOHO Series in de taal/talen: Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info