779730
27
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
27
19. CICLOGUIDE2
You can find the software «CicloGuide2» on our homepage www.ciclosport.com for free download.
Please install the software on your PC. Before you start the «CicloGuide2», the NAVIC 400 has to
be connected with the enclosed USB cable and the PC, as the software directly acquires and then
displays the data of the NAVIC 400 at startup. The software «CicloGuide2» helps you to manage
your device. With the help of the software you can keep the NAVIC 400 always up to date by
updates.
You can also delete maps from your device and «load» other «country maps».
With the software you can also manage your GPX files and decide whether they should be stored
directly in the memory of the device (if there is enough space) or on the optionally available memory
card.
20. TROUBLESHOOTING
Problem
Possible cause
Solution
Navigation device
does not start
Battery capacity too low
Connect the device to a suitable power source. The
unit should then start automatically after a few
minutes. If the device is not used for a longer period,
please switch it off completely. Press the on/off
switch and tap «Switch off».
No GPS reception /
GPS reception is
interrupted
GPS reception may be
disturbed in the forest or by
narrow urban canyons,
heavy cloud cover, etc.
Reposition the navigation device if necessary. At
least 4 satellites are required for navigation.
This information is available on the device under
«Settings» -> «GPS Info».
Device no longer
responds to inputs
Occasionally, overloading
may cause the device to
stop responding
Please reset the unit by pressing the ON/OFF button
on the right side of the unit for about 15 seconds until
the unit starts up again.
Compass does not
align properly
Compass does not
align properly
Compass does not
align properly
The compass should be
calibrated regularly
Calibrate the compass again. Hold the compass
horizontally for the best possible functionality.
The unit is not held leveled
enough
Do not tilt the unit more than 70° horizontally when
using the compass.
There are interference
sources in the immediate
vicinity
Make sure that there are no interference sources
such as magnets or power lines in the vicinity.
Barometer values are
not correct
The barometer should be
calibrated regularly
In case of weather changes or if you have to cope
with large differences in altitude, you should calibrate
the barometer several times a day
The destination you
are looking for cannot
be entered
The destination you
are looking for cannot
be entered
The corresponding country
map may not be available
Please check whether the corresponding detailed
map is included in the scope of delivery or already
pre-installed. For a possibly necessary installation
please use the CicloGuide2 software.
Town / street / house
number are not included in
the map material
Select an adjacent city / street / house number in the
input mask. Alternatively, the destination can be set
manually in the «Map» view.
Despite the latest map versions, there are still
unrecorded areas.
Elevation jumps are
included in the track
The barometer was not
calibrated before starting
theTrack recording.
It is recommended to calibrate the barometer
manually, by entering an altitude, especially before a
track recording
27

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ciclo-Navic-400

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ciclo Navic 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ciclo Navic 400 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ciclo Navic 400

Ciclo Navic 400 Gebruiksaanwijzing - Deutsch - 31 pagina's

Ciclo Navic 400 Gebruiksaanwijzing - Français - 32 pagina's

Ciclo Navic 400 Gebruiksaanwijzing - Italiano - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info