588919
5
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
5
For a better reading in the following chapters the setting modes are fat
printed and the settings fat and italic.
SET BIKE1 / SET RAD1
Adjustment of bike-specific values, e.g. total distance, circumference,
unit and more for bike 1.
Choose with centre button.
To do these settings for bike 2, press right and left button short simul-
taneously in normal mode. CM 8.2 switches to bike 2, then enter again
setting mode (display then shows SET BIKE2/SET RAD2).
DAY DST / TAGES-DST
Adjustment of the daily distance
Default: 000.00 km
Range: 000,00 to 999,99 km or m
Set with right and left button, store with left button.
Here the daily distance can be adjusted, e.g. the point of starting a tour,
when using a printed tour-guide.
(This setting doesn’t change the total distance. Only really ridden kilo-
metres are counted).
TOT DST / GES. DST
Adjustment of the total distance
Default: 0000 km
Range: 0 to 99999 km or m.
Set with right and left button, store with left button.
Here the total distance can be adjusted.
Wheel/Radumf.
Adjustment of circumference
Default: 2080 mm
Range: 0000-3999 mm
Set with right and left button, store with left button.
Here the circumference can be adjusted.
Size Circumference
40-559 26 x 1,5 2026 mm
44-559 26 x 1,6 2051 mm
47-559 26 x 1,75 2070 mm
50-559 26 x 1,9 2026 mm
54-559 26 x 2,00 2089 mm
57-559 26 x 2,125 2114 mm
37-590 26 x 1 3/8 2133 mm
32-620 27 x 1 1/4 2199 mm
40-622 28 x 1,5 2224 mm
47-622 28 x 1,75 2268 mm
40-635 28 x 1 1/2 2265 mm
37-622 28 x 1 3/8 2205 mm
20-622 700 x 20C 2114 mm
23-622 700 x 23C 2133 mm
25-622 700 x 25C 2146 mm
28-622 700 x 28C 2149 mm
32-622 700 x 32C 2174 mm
The circumference of the wheel can be taken from the chart
(Pict. G) or be measured by yourself.
Measuring the circumference of the wheel (for a more precise setting):
Put a marking at the front-tire and on the ground (e.g. with chalk). Ride
straight ahead exactly one turn of a tire (for a very exact measurement,
check the pressure of the tire before getting on your bike) and mark this
position on the ground. Now measure the exact circumference of the
wheel between the two markings at the ground (in mm) – see pict. F.
Unit km bzw. Unit mi
Adjustment of the measuring unit (kilometres or miles)
Default: km
Set with right button, store with left button
Here you can choose whether the display should show kilometres
(km/h) or miles (m/h).
SPD INISCAN
To start this function, simultaneously press the left and right buttons
briefly, jump setting with left button.
To initialize the speed transmitter (for first use or after battery/trans-
mitter change):
First, activate the speed transmitter (by moving the magnet close to
the transmitter where marked) then press the left and right buttons
simultaneously. A percentage will be displayed in the upper display. If
transmitter has been initialized successfully, the next setting option will
be displayed.
If transmission could not be initialized (e.g. transmitter was not activa-
ted) “error” will be displayed in the upper display. By pressing the left
and right buttons simultaneously the search for the transmitter will be
started again, to jump this setting press left button.
CAD OFF/TRITT AUS
Switch cadence on/off (ON/AN – OFF/AUS)
Default: OFF/AUS
Set with right button, store with left button
Here you can switch on/off the cadence measuring. To use this function
you need the optional cadence-set (available at your local dealer).
CAD INISCAN
To start this function, simultaneously press the left and right buttons
briefly, jump setting with left button.
To initialize the cadence transmitter (for first use or after battery/trans-
mitter change):
First, activate the cadence transmitter (by moving the magnet close
to the transmitter where marked) then press the left and right buttons
simultaneously. A percentage will be displayed in the upper display. If
transmitter has been initialized successfully, the next setting option will
be displayed.
If transmission could not be initialized (e.g. transmitter was not activa-
ted) “error” will be displayed in the upper display. By pressing the left
and right buttons simultaneously the search for the transmitter will be
started again, to jump this setting press left button.
SET CLOCK / SET UHR
Adjustment of clock, date and clocktime-format.
Choose with centre button
Time / Uhrzeit
Adjustment of clock
Range: 00:00 to 23:59 or 12:00 to 11:59 A/P
Set with right and left button, store with left button
Here you can set the current clocktime. First you set the hours, then
the minutes.
Year / Jahr
Adjustment of the year
Default: 2007
Range: 2007 to 2099
Set with right button, store with left button
Here you can set the current year.
Month / Monat
Adjustment of the month
Default: 01
Range: 01 to 12
Set with right button, store with left button
Here you can set the current month.
Day / Tag
Adjustment of the day
Default: 01
Range: 01 to 31
Set with right button, store with left button
Here you can set the current day.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ciclo CM 8.2 Master bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ciclo CM 8.2 Master in de taal/talen: Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ciclo CM 8.2 Master

Ciclo CM 8.2 Master Gebruiksaanwijzing - Nederlands - 10 pagina's

Ciclo CM 8.2 Master Gebruiksaanwijzing - Deutsch - 10 pagina's

Ciclo CM 8.2 Master Gebruiksaanwijzing - Français - 10 pagina's

Ciclo CM 8.2 Master Gebruiksaanwijzing - Italiano - 10 pagina's

Ciclo CM 8.2 Master Gebruiksaanwijzing - Espanõl - 10 pagina's

Ciclo CM 8.2 Master Gebruiksaanwijzing - Dansk - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info