574369
6
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
UK
3. Configuring the IRIS Touch Dialler
The majority of configurations can be carried out via the touch screen interface
display on the IRIS dialler. For more complex systems, for example where the data
port is used, additional configuration is available via the USB connector using a
laptop / PC and IRIS dialler configuration software (available via the Chiron website
at www.chironsc.com).
The touch screen display on the IRIS dialler provides an Installation Wizard which
guides you through a set of instructions for configuring the dialler. It is
recommended that you use this Wizard as it automatically carries out tests as you
proceed through the configuration.
Note: To select an option on the screen, touch the screen display.
Use the following procedure to configure the IRIS Touch Dialler:
1. Plug the power cable into the battery backed supply of the alarm panel. The
cable with the white stripe is the –ve connection. Ensure that the display on the
dialler becomes active.
The dialler carries out a self test and the Welcome screen then displays.
Note: If the power has been connected for the first time the Language menu
displays. Select the appropriate language from the list of languages available.
2. Select the
Installer Menu option from the Welcome screen.
Note: The default installer password is 111111.
3. Select the
Installation Wizard option from the Installation Menu.
4. Follow the remaining instructions on the screen to complete the configuration.
Note: During the installation procedure the Wizard shows the GSM/GPRS
signal strength. At this time the antenna position can be adjusted for optimum
signal.
(GSM / Ethernet & GPRS only).
Once the installation is completed successfully the message Status - System
OK is displayed on the Welcome screen and the LED Indicator on the top of the
unit is on steady.
Note: If the ‘Alarm Override’ mode is selected, the IRIS Touch Dialler replaces
the phone number and the account number used by the alarm dialler with the
IP address of the Monitoring Centre and Account Number entered during
configuration, so there is no need to change any settings on the alarm dialler. If
this is not appropriate (e.g. if the alarm dialler uses more than one account
number) then the telephone number dialed by the alarm dialler should be set to
the IP address of the Monitoring Centre in 12 digit format (e.g. 192.168.0.34
becomes 192168000034).
5. Carry out all the standard alarm signaling tests appropriate for the alarm
system.
6. Replace the cover on the alarm panel enclosure.
The installation is complete.
2 IRIS Touch 400 Range Dialler Quick Installation Manual (Version 1.0)
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Chiron IRIS Touch 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Chiron IRIS Touch 400 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Chiron IRIS Touch 400

Chiron IRIS Touch 400 Installatiehandleiding - English - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info