791760
6
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
6 | ENGLISH
button (3). A red LED will light up under the button and shortly the screen will light up
as three LEDs will illuminate the screen. To change the LEDs (the default setting is 3
LEDs on), press the “Up” button for 6 LEDs on. Press the button again, and the LEDs are
turned off. To turn off the microscope, press (on some units press and hold) the “Power”
button, and the screen will show “Shutting Power Off”. To change from Viewing Objects/
Taking Snapshots to Taking Videos to Review Images, press the “M” button to rotate to
the desired function.
A. VIEWING OBJECTS — To view objects, use the Viewing/Snapshot mode.
1. Icons seen on the LCD Screen — in the top right, “A” indicating viewing mode.
In the top left, shows battery condition. The bottom right shows the resolution
selected as well as the number of images available (to take) at the chosen
resolution. Also at the bottom right, is “M” or “SD” (or similar designations) to
note if internal memory or an optional SD Card is being used. On the left side,
digital zoom power is displayed (if using this function).
2. Focusing and changing Power — use the Focus Ring (8) to change power
and focus to see a sharp image. You can rest the LED Cover (9) directly on/
over an object to view. Always start with the low power (3.7x) by rotating the
focus ring to the far left and move the ring slightly to get a sharp focus. The
most enjoyable views may be seen at low power which has a wider field of view
and a brighter image. To achieve an even lower power setting (varying from
3.7x down to 1x),raise the microscope above the object. As the microscope is
raised higher and power decreases, refocusing may be necessary. To change
to high power (54x), rotate the Focus Ring all the way to the right and turn the
ring slightly to obtain a sharp focus. You must use the high power directly on or
slightly above an object to obtain a sharp focus. For low power, the three LEDs
should be adequate, but you may need six LEDs when using high power to
illuminate the object. Remember that using all six LEDs reduces the life of the
batteries. To achieve higher powers than the standard low and high power, you
can use the digital zoom feature by pressing the “Down Button” in the Viewing
or Video modes. Pressing once will go to 2x digital zoom and pressing again
will go to 4x. Pressing the button again reverses the zoom function. This feature
gives you additional benefit by allowing you to digitally magnify an image to
make it more enjoyable on some objects.
B. TAKING SNAPSHOT IMAGES — To take snapshots, you must be in the Viewing/
Snapshot mode. Press the “Snapshot/Video Button”, and the images will then be
stored in internal memory or on an SD Card if using one.
C. TAKING VIDEOS — To take videos, you need to be in the Video Mode (the video icon
will be in the top right of the LCD screen). Once the image is in focus, press the
“Snapshot/Video Button” (4) and recording will begin. To stop the recording, press
the same button again. The time of the video as it is being recorded, is shown at the
bottom of the LCD.
D. USING AN SD CARD — You can also take images (snapshot or video) by using an SD
(Secure Digital) Card. Your SD card is inserted in the SD Card Slot (10) on the back
of the microscope. When you insert the SD card properly, the SD card icon will be
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Celestron 44312 Cosmos bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Celestron 44312 Cosmos in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info