471846
32
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
ENG
FR
32
Vous ne pouvez pas mesurer la vitesse de voyage de cadence.
Vérifiez si la distance entre le capteur de vitesse (cadence) et l'aimant n'est pas trop
éloigné.
La ligne d'indication du capteur de vitesse (cadence) est-elle en dehors du centre
de l'aimant ?
Ajustez correctement la position du capteur de vitesse (cadence) et de celui de
l'aimant. (Voir "Installation du compteur sur votre vélo" à la page 8.)
Les signaux du capteur ne sont pas reçus.
La mise en veille est-elle indiqué sur l'écran ?
Annulez le mode de mise en veille en appuyant sur une touche.
Le numéro didentification du capteur de lunité principale est-il pareil à celui reçu
du capteur san fil?
Sinon, vérifiez une fois de plus les numéros didentification en suivant les éta-
pes décrites dans la section Numéro didentification du capteur en page 27.
La batterie du capteur est-elle épuisée ?
Remplacez-la avec nouvelle batterie (CR2032). Après remplacement, soyez
certain de contrôler l'identification du capteur (page 27).
La batterie pour l'appareil est-elle epuisee?
Remplacez-la avec une nouvelle batterie (CR2032). Après remplacement,
soyez sûr de répéter l'opération (page 10).
Vous ne pouvez pas contrôler l'identification du capteur. (La lettre E apparaît sur l'écran-2.)
Quand vous effectuez un contrôle du numéro didentification, lunité principale
est-elle à une distance de 20 - 100 cm du capteur?
Réinitialisez le capteur en ajustant la distance.
La batterie du capteur est probablement épuisée. Après substitution de la batterie avec
une nouvelle (CR2032), contrôlez de nouveau l'identification de capteur (page 27).
Les informations des tours parcourus ne peuvent pas être enregistrées.
Avez-vous déjà terminé 50 tours ?
Réinitialisez les données de mesure pour supprimer le journal des tours de circuit.
Est ce que l'interval de tour plus de 27 heures (ou est ce que la distance de voyage
dans un interval est plus de 999.99 kilomètres ?)
Avec ces valeurs dépassées, le tour ne peut pas être mesuré.
Qu'indique l'écran de tours ?
Si l’écran des tours de circuit saffiche immédiatement après lenregistrement
des tours ou quand l’écran daffichage des données des tours saffiche par
exemple il nest pas possible denregistrer un tour.
En appuyant sur la touche LIGHT, cela assombri l'écran.
La capacité restante de batterie pour l'appareil est très faible.
Remplacez-la avec une nouvelle batterie (CR2032) aussitôt que possible. Après
remplacement, soyez certain répétez l'opération (page 10).
Cannot measure the trip speed or cadence.
Check whether the distance between the speed (cadence) sensor and the
magnet is too large.
Is the indication line of the speed (cadence) sensor arm off the center of the
magnet?
Adjust the position of the speed (cadence) sensor arm and that of the mag-
net correctly. (See Basic installation and operation on page 8.)
Sensor signals are not received.
Is SLEEP indicated on the screen?
Cancel the sleep mode by pressing a button.
Is the sensor ID set on the main unit the same as the ID sent from the wireless
sensor?
If not, recheck the IDs following the steps described in Sensor ID on page 27.
Is the battery for the sensor depleted?
Replace it with a new battery (CR2032). After replacement, be sure to
check the sensor ID (page 27).
Is the battery for the main unit depleted?
Replace it with a new battery (CR2032). After replacement, be sure to per-
form the restarting operation (page 10).
You cannot check the sensor ID. (Letter E appears on Display-2.)
When performing the ID check, is the main unit within 20-100cm distance of
the sensor?
The battery for the sensor is possibly depleted. After replacing the battery
with a new one (CR2032), check the sensor ID again (page 27).
Lap data cannot be stored.
Have you already completed 50 laps?
Reset the main measurement data to erase lap record.
Is the lap time over 27 hours (Or is the trip distance in an interval over 999.99
km?)
With these values exceeded, the lap cannot be measured.
Is the lap screen currently displayed?
When the lap screen is on for example, immediately after lap recording or
while you are on the lap data viewing screen.
Pressing the LIGHT button dims the display.
The remaining battery capacity for the main unit is very weak.
Replace it with a new battery (CR2032) as soon as possible. After replace-
ment, be sure to perform the restarting operation (page 10).
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cateye CC-CD300DW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cateye CC-CD300DW in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cateye CC-CD300DW

Cateye CC-CD300DW Gebruiksaanwijzing - Nederlands - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info