288820
18
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
69
Symptom Probable Cause Action
1. Unprotect the page
you want to delete
(page 50).
2. Change to a normal-
size, 1-page display
format.
Remove batteries and
disconnect the AC adap-
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an author-
ized CASIO service pro-
vider.
Adjust the BRIGHT set-
ting (page 11).
Remove batteries and/or
unplug the AC adaptor.
Reload batteries and/or
plug in AC adaptor and try
operation again.
Adjust the BRIGHT
(brightness) setting.
1. Connect correctly
(page 58).
2. Turn power on after
connecting cable.
3. Set function switch to
PLAY (page 31).
1. All pages are pro-
tected.
2. Multi-page display
(page 34) or zoom dis-
play (page 36)
Malfunction due to static
electrical charge or strong
impact
Wrong BRIGHT setting
Malfunction due to expos-
ing camera to electro-
static charge.
Incorrect BRIGHT setting
1. Incorrect cable con-
nection
2. Camera connected to
is not turned on.
3. Function switch sets to
REC.
Delete opera-
tion does not
start when DEL
is pressed.
All buttons and
switches do not
operate.
Very bright or
very dark LCD
image.
No buttons or
switches oper-
ate.
LCD monitor is
too bright or too
dark.
Cannot ex-
change data be-
tween two cam-
eras
Other
Deletion
70
Reference
Symptom Probable Cause Action
Pressing MODE
does not change
the FINE
NORMAL Menu.
Cannot transfer
data (error
keeps occurring)
Keys of con-
nected camera
are disabled.
1. Correct the situation
and try again.
2. Correct the situation
and try again.
3. Change function
switch setting of re-
ceiving camera to
PLAY (page 31).
4. The sending camera’s
protected memory
pages are hidden. Un-
hide protected memory
pages by holding down
[–] while turning power
on (page 52).
5. Replace batteries or
use the AC adaptor
(page 13).
6. Securely reconnect the
cable.
Normal operation will re-
turn when you exit data
communications by press-
ing EXIT.
There are no convertible
images in memory.
1. Sending camera’s
memory is empty.
2. Receiving camera’s
memory is full
3. Receiving camera’s
function switch is in
REC position.
4. The message “ALL
DATA IS PROTECT-
ED” is on the monitor
of the sending camera.
5. Low battery (indicated
by
)
6. Disconnection of cable
during data communi-
cation
Connected camera op-
eration is disabled during
data communications.
Troubleshooting
Other
71
Camera is set up to hide protected images, and all
images are protected.
ERROR Error during data communication. Check cable con-
nections and mode settings.
REMAIN No more memory for FINE images. Use MODE to
change to NORMAL Mode, delete some images, or
change resolution of existing images from FINE to
NORMAL.
MEMORY FULL Not enough memory for further recording. Delete
some images from memory or change resolution of
stored images from FINE to NORMAL.
MEMORY EMPTY No images are stored in memory.
ALL DATA IS
PROTECTED
Messages
72
Reference
Problem with internal memory. Perform the following
procedure.
Important!
The following procedure deletes all images stored in
memory. You can use the optionally available floppy
disk drive (FD-10V) or connection kit (LK-10V/LK-2V)
to make copies of images before deleting them.
1. Holding down the EFFECT
and DEL buttons, turn on
camera power.
2. After checking that the SYSTEM RESET message
is on the display, press the shutter button to per-
form a system reset or turn power off if you do not
want to perform a system reset.
Never turn off power while the system reset is in
progress! Doing so will damage camera memory
are require servicing by an authorized service
provider!
Be sure to power the camera using the AC adap-
tor or a new set of alkaline or lithium batteries.
Weak batteries or manganese batteries can re-
sult in a power failure while the system reset
operation is in progress, causing damage to cam-
era memory.
After the final “SYSTEM RESET” confirmation mes-
sage appears, press the shutter button.
The display should return to normal after the system
reset is complete.
Important!
System reset can result in a change in the order of
images stored in camera memory.
Corrupted images may be lost entirely.
If image data is partially corrupted, parts of the im-
age may not be recoverable.
Problem with internal memory. Contact your dealer or
an authorized CASIO service provider.
MEMORY ERROR
#1~#3
CONSULT THE
OWNER’S MANUAL!
SYSTEM RESET
YES SHUTTER
NO CALL TECH
SUPPORT
MEMORY ERROR
#4
CONSULT THE
OWNER’S MANUAL!
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio qv 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio qv 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info