40231
14
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
E-13
4. Press SET to store the text in memory or ESC to abort the store procedure
without storing anything.
You can have only one block of text stored in memory.
If you perform the data store operation while there is already a block of text in
memory, the message “OVR?” (“OK to overwrite the existing text?”) appears
when you press SET in step 4. When this happens, press SET again to replace
the existing data with the new data, or ESC to abort the store procedure
without storing anything.
To recall text from memory
1. While the input screen is on the display, press MEMO.
Note that text recalled from memory will replace any text currently on the
display.
2. Press H or J a number of times to change to
the text recall prompt.
3. Press SET.
If all of the text does not fit on the display, you can use H and J to scroll it to
the left and right.
4. Press SET to recall the text from the area that is currently on the display.
Note that recalling text from memory replaces anything that is currently on
the input display. Memory text cannot be appended.
.
To adjust the print density
1. Press FUNC and then SIZE (DENSITY).
2. Use H and J to move the underlining to the density setting that you want.
The lightest setting is 1, while the darkest setting is 5. The standard setting is 3.
Only four of the five settings that are available can appear on the display. The
display scrolls left and right when necessary to show all of the available settings.
3. When the density setting is the way you want it, press SET to register it.
Manual Feed
To manually feed tape
Press FUNC and then PRINT (FEED) to feed the tape 19mm.
Part 7 Memory
This part of the manual tells you how to store text in memory for instant recall
when you need it. You can have one block of text (containing up 63 characters)
stored in memory.
Important!
Text stored in memory is deleted whenever batteries go dead and when you
replace batteries. Be sure to keep written backup copies of all important text.
To store text into memory
1. Input the text you want to store.
2. Press MEMO.
3. Press H or J a number of times to change to
the text store prompt.
1234
STR?
CAL?
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Casio-KL-60

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio KL-60 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio KL-60 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio KL-60

Casio KL-60 Gebruiksaanwijzing - Deutsch - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info