723409
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Operation Guide DQ-980
2
GENERAL GUIDE
11
11
1 SNOOZE/LIGHT button
Press this button to illuminate the display for about five seconds.
Pressing this button while the alarm is sounding stops the alarm.
2 32 3
2 32 3
2 3
+
/
buttons
Use these buttons to change the setting that is flashing on the display.
44
44
4 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
55
55
5 DEMO button
Press this button to sound the alarm.
66
66
6 SET button
Use this button when setting the current time.
77
77
7 RESET button
Press this button to reset the clock after replacing its battery.
USING THE CLOCK
1. Press the SET button (6) to cycle through the setting screens as shown below.
12-hour/24-hour Setting Screen Time Setting Screen
Month and Day Setting ScreenYear Setting ScreenNormal Timekeeping Screen
2. While the screen you want is displayed, use the + and buttons (2 3) to change the flashing digits.
Holding down + or changes the flashing digits at high speed.
You can set the year in the range of 2000 to 2069. The day of the week is set automatically in accordance
with the date setting.
Pressing + or while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
Each press of + or while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and
24-hour timekeeping.
(+) Increase
() Decrease
3. After making the settings you want, use the SET button (6) to display the Normal Timekeeping Screen.
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about five minutes without performing any operation.
USING THE ALARM
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (4) to
select the snooze alarm feature.
Setting the Alarm Time
Use the + and – buttons (2 3) to set the alarm time.
Pressing the + and – buttons (2 3) causes the alarm time to appear in place of the date on the display.
(+) Increase
() Decrease
Holding down + or changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (4) to turn the alarm on and off, and to select the snooze feature.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (4) is set to ON
or SNZ.
The volume of the alarm sound cycles through five levels as it sounds.
Stopping the Alarm
When the alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned
on, the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Mode selector (4) to OFF.
Demo Alarm
Press the DEMO button (5) to sound the alarm.
THERMOMETER FUNCTIONS
Display Range: –19.9°C (Under: LL) to 49.9°C (Over: HH)
Guaranteed Range: 0°C to 40°C
HYGROMETER FUNCTIONS
Display Range: 20% (Under: LL) to 90% (Over: HH)
Sensor Precision: ±10% when temperature is 5°C to 40°C.
Alarm Mode selector
SNZ ( )
ON ( )
OFF
Description
The alarm sounds at the preset time for one minute, and up to seven more times every
five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button
(1), the alarm sounds again about five minutes later.
The indicator
flashes on the display to indicate that the snooze feature is
activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio DQ-980 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio DQ-980 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info