797482
2
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
Operation Guide 5416
E-19
Dual Time Mode
You can use the Dual Time Mode to set a second time that is different from the
Timekeeping Mode time.
To enter the Dual Time Mode
Use C to select the Dual Time Mode as shown on page E-9.
To set the Dual Time
1. In the Dual Time Mode, hold down B for at least two
seconds until the hour starts to flash. This is the setting
mode.
2. Press B to move the flashing between the hour and
minute settings.
Hour
E-18
To perform an elapsed time operation
BBBBB(Two seconds)
Start Stop (Restart) (Stop) Reset
Note
x The Stopwatch Mode can indicate elapsed time up to 23hours, 59minutes,
59seconds.
x After the elapsed time reaches one hour, the display units change to hours,
minutes, and seconds, and time is measured in one-second increments.
E-17
Using the Stopwatch
The stopwatch measures elapsed time.
To enter the Stopwatch Mode
Use C to select the Stopwatch Mode as shown on page
E-9.
Minutes Seconds
1/100 Seconds
E-16
4. Press B to exit the setting mode.
To test the alarm
In any mode, hold down C to sound the alarm.
To turn an alarm on and off
In the Alarm Mode, each press of B toggles between on and off.
Alarm on Alarm off
To stop the alarm
Press any button.
E-15
Using the Alarm
When an alarm is turned on, the alarm tone will sound when its alarm time is reached.
To enter the Alarm Mode
Use C to select the Alarm Mode as shown on page E-9.
To set an alarm time
1. In the Alarm Mode, hold down B for at least two
seconds until the hour starts to flash. This is the setting
mode.
2. Press B to move the flashing between the hour and
minute settings.
3. While a setting is flashing, use C to change it.
x When setting the alarm time using the 12-hour
format, take care to set the time correctly as a.m. (no
indicator) or p.m. (P indicator).
Hour
E-14
3. When the timekeeping setting you want to change is flashing, use C to change it
as described below.
Screen To do this:
Reset the second to 00
Change the hour or minute
Toggle between 12-hour (12H) and 24-hour (24H) timekeeping
4. Press B to exit the setting mode.
Note
x While 12-hour format is selected for timekeeping, a P indicator will appear for
times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
P indicator.
E-13
Adjusting the Digital Time Setting
Use the procedure below to adjust the digital time setting.
To configure the digital time setting
1. In the Timekeeping Mode, hold down B for at least
two seconds until the second start to flash. This is the
setting mode.
2. Press B to move the flashing in the sequence shown
below to select the other settings.
BBBB
Timekeeping Mode
Second12/24-Hour Format
B (two seconds)
Hour
Minute
Second
E-12
To configure the date setting
1. In the Calendar Mode, hold down B for at least two
seconds until the year start to flash. This is the setting
mode.
2. Press B to move the flashing in the sequence shown
below to select the other settings.
BBB
Calendar Mode
Year
B (two seconds)
MonthDay
3. When the date setting you want to change is flashing, use C to change it.
4. Press B to exit the setting mode.
Year
E-11
Adjusting the Date Setting
Use the procedure below to adjust the date setting.
Note
x You can specify a date in the range of January 1, 2000 to December 31, 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
If you leave a setting mode with flashing digits on the display for two or three minutes
without performing any operation, the watch exits the setting mode automatically.
Scrolling
The C button is used on the setting mode to scroll through data on the display. In
most cases, holding down this button during a scroll operation scrolls through the
data at high speed.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio AW-500E - QW-5416 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio AW-500E - QW-5416 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info