624479
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
E-88
Using the Alarm
You can set fi ve independent daily alarms. When an alarm is turned on,
an alarm will sound for about 10 seconds each day when the time in the
Timekeeping Mode reaches the preset alarm time. This is true even if the
watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will cause the watch
to beep twice every hour on the hour.
To enter the Alarm Mode
Use
B
to select the Alarm Mode (
ALARM
) as shown on page E-30.
About one second after
ALARM
appears on the display, the display
will change to show an alarm name (
AL1
through
AL5
) or the
SIG
indicator. The alarm name indicates an alarm screen.
SIG
is shown
when the Hourly Time Signal screen is on the display.
When you enter the Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
Alarm name
(AL- or SIG)
Alarm time
(Hour : Minutes)
Alarm name
(AL- or SIG)
Alarm time
(Hour : Minutes)
E-89
To set an alarm time
1. In the Alarm Mode, use
A
and
C
to scroll through the alarm screens
until the one whose time you want to set is displayed.
AL1 AL2 AL3
SIG* AL5
AL4
* There is no time setting for the hourly time signal.
2. Pull out the crown.
This will cause the hour and minute digits of the alarm time to fl ash.
3. Rotate the crown to adjust the minute setting.
Hour setting will change in accordance with minute setting changes.
4. Press
B
.
5. Rotate the crown to adjust the hour setting.
If you are using 12-hour timekeeping, the P (p.m.) and A (a.m.) indicators will also appear on the
display.
6. After the settings are the way you want, push the crown back in.
Setting an alarm time causes that alarm to turn on automatically.
Alarm ON/OFF indicatorAlarm ON/OFF indicator
E-90
To turn an alarm and the Hourly Time Signal on and off
1. In the Alarm Mode, use
A
and
C
to select an alarm or the Hourly Time Signal.
2. When the alarm or the Hourly Time Signal you want is selected, press
D
to turn it on and off.
The alarm on indicator (when any alarm is on), and the Hourly Time
Signal on indicator (when the Hourly Time Signal is on) are shown on
the display in all modes.
To stop the alarm
Press any button.
To test the alarm
In the Alarm Mode, hold down
A
to sound the alarm tone.
Hourly time signal
on indicator
Alarm on indicator
Hourly time signal
on indicator
Alarm on indicator
E-91
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to display the current time in any one for 29 time zones (29 cities)
around the world, and in the UTC (Universal Time Coordinated) time zone. The city that is currently
selected in the World Time Mode is called the “World Time City”.
To enter the World Time Mode
Use
B
to select the World Time Mode (
WT
) as shown on page E-30.
This causes
WT
to appear on the digital display. After one second, the
hour and minute hands move to indicate the time in the current World
Time City. The second hand points to the city code of the currently
selected World Time City.
The digital display shows the current time in the Home City.
To check whether the indicated World Time City time is a.m. or p.m.,
press
A
. This will cause the second hand to move to
A
(a.m.) or
P
(p.m.) The second hand will return to regular timekeeping after about
three seconds.
Pressing
D
will cause the second hand to move to the currently
selected World Time City city code. The second hand will return to
regular timekeeping after about three seconds.
Currently selected
Word Time City
Current timekeeping
Mode time
Current time in the currently
selected World Time City
Currently selected
Word Time City
Current timekeeping
Mode time
Current time in the currently
selected World Time City
E-92
To confi gure World Time City and summer time settings
1. In the World Time Mode, pull out the crown.
This will cause CITY to fl ash on the digital display.
2. Rotate the crown to move the second hand to the City Code you want
to select.
The currently selected World Time City will be indicated by the
second hand.
3. Press
B
.
This will cause the current DST setting (DST ON or DST OFF) to
ash on the display.
4. Rotate the crown to select either on (
DST ON
) or off (
DST OFF
) for the
DST setting.
5. After the settings are the way you want, push the crown back in.
Note that you cannot switch between standard time/daylight
saving time (DST) while UTC is selected as the World Time City.
Note that the standard time/daylight saving time (DST) setting
affects only the currently selected time zone. Other time zones are
not affected.
DST indicatorDST indicator
E-93
Swapping the Home City and World Time City
You can use the procedure below to swap your Home City with your World Time City. This function comes
in handy for those who often travel between two different time zones. The following example shows what
happens when the Home City and World Time City are swapped while the Home City originally is
TOKYO
(
TYO
) and the World Time City is
NEW YORK
(
NYC
).
Home City World Time City
Before swapping
Tokyo
10:08 p.m
(Standard time)
New York
9:08 a.m.
(Daylight saving time)
After swapping
New York
9:08 a.m.
(Daylight saving time)
Tokyo
10:08 p.m.
(Standard time)
The procedure below assumes that World Time Mode settings start with the analog hands indicating
New York (NYC) time and the digital display indicating Tokyo (TYO) time.
E-94
To swap your Home City and World Time City
In the World Time Mode, hold down
D
for at least three seconds.
After
CITY
ashes on the digital display, the watch will swap the
Home City and World Time City settings. With the above example, the
second hand will move to
TYO
(Tokyo). The hour and minute hands
will move to the current time in Tokyo (
TYO
).
The second hand will return to regular timekeeping after about three
seconds.
With the above example, the digital display will now show the current
time in New York (
NYC
).
To access the UTC (Universal Time Coordinated) time zone
In the World Time Mode, hold down
A
for at least three seconds.
This will cause
UTC
to fl ash on the digital display, and then the hour and minute hands will move to the
current time in the UTC time zone. The second hand will move to the UTC city code at this time. The
second hand will return to regular timekeeping after about three seconds.
E-95
Illumination
The display of the watch is illuminated for easy reading in the dark.
The watch’s auto light switch turns on illumination automatically when you angle the watch towards your
face.
The auto light switch must be turned on (page E-97) for it to operate.
To turn on illumination manually
Press
L
in any mode to illuminate the display.
Illumination will turn off automatically if an alarm starts to sound or if you perform a crown operation.
Illumination will not turn on if a calibration signal receive operation or hand movement operation is in
progress. Also, illumination may not turn on while a sensor is taking a reading.
To change the illumination duration
1. In the Timekeeping Mode, pull out the crown.
2. Press
B
four times. This will cause
LIGHT
to appear on the digital display, along with a fl ashing value
(
1
or
3
) indicating the current illumination duration setting.
3. Rotate the crown to select either
1
(1.5 seconds) or
3
(three seconds) for the illumination duration.
4. After the setting is the way you want, push the crown back in.
Operation Guide 5463
12

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Casio-5463---GWG-1000

Zoeken resetten

  • Ik zou graag de Nederlandse vertaling willen hebben van de Casio 5463 - GWG-1000.

    Kan iemand mij daarmee helpen? Gesteld op 31-1-2018 om 15:51

    Reageer op deze vraag Misbruik melden
  • Kan iemand mij vertellen wanneer de Nederlandse gebruikershandleiding voor de Casio module no. 5463 ter beschikking komt? De tweede vraag is of deze Nederlandse gebruikershandeiling op een andere site te downloaden? Gesteld op 19-3-2017 om 12:28

    Reageer op deze vraag Misbruik melden
  • Waar blijft die Nederlandse handleiding gvd
    Die ... Duitsers altijd voorrang Gesteld op 7-8-2016 om 13:27

    Reageer op deze vraag Misbruik melden
    • Heel frusterend, koop je een klok van 700 euro, mag je het uitzoeken in het Duits of Engels etc.
      Terwijl ze in de winkel riepen dat de Nederlandse versie op internet is te vinden.
      NIET DUS!!!!! Geantwoord op 11-8-2016 om 15:25

      Waardeer dit antwoord (25) Misbruik melden
    • Inderdaad ja
      Wat een hersenloze daar bij casio
      Alsof ze in Mongolië nog met meer casios rondlopen dan in Nederland
      Want daar hebben ze waarschijnlijk nog eerder een handleiding voor klaar liggen!!!! Geantwoord op 11-8-2016 om 15:29

      Waardeer dit antwoord (6) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5463 - GWG-1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5463 - GWG-1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 5463 - GWG-1000

Casio 5463 - GWG-1000 Gebruiksaanwijzing - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info