624833
1
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Operation Guide 5394 (OC)
E-7
2. Check the Home City.
Use the procedure under “To confi gure Home City settings” (page E-27) to confi gure your Home City.
Important!
x Proper time calibration signal reception depends on correct Home City, time, and day settings in the
Timekeeping Mode. Make sure you confi gure these settings correctly.
3. Set the current time.
x To set the time using a time calibration signal
See “To get ready for a receive operation” (page E-18).
x To set the time manually
See “Confi guring Current Time and Day Settings Manually” (page E-30).
The watch is now ready for use.
x For details about the watch’s radio controlled timekeeping feature, see “Radio Controlled Atomic
Timekeeping” (page E-16).
E-6
Things to check before using the watch
1. Hold down
B
at least two seconds to enter the Timekeeping Mode, and then observe the
movement of the
2
Second Hand.
Is the
2
Second Hand moving smoothly at one-second intervals?
Is the
2
Second Hand moving at two-second intervals
or is it stopped completely?
Go to step 2.
The watch is charged. For details about
charging, see “Charging the Watch”
(page E-11).
Power is low. Charge the watch by placing it in a
location where it is exposed to light. For details, see
“Charging the Watch” (page E-11).
NO
YES
YES
NEXT
E-5
To start HS1 high-speed movement
While the crown is pulled out, rotate it rapidly away from you (forward) or towards
you (reverse) until the desired HS1 high-speed movement starts.
To start HS2 high-speed movement
While HS1 high-speed movement is in progress, again rotate the crown rapidly,
away from you (forward) or towards you (reverse) in the same direction as the
HS1 movement until HS2 high-speed movement starts.
To stop high-speed movement
Rotate the crown in the direction that is opposite that of the current high-speed
movement or press any button.
Note
x You can use high-speed hand movement when confi guring time settings in the Timekeeping Mode,
Alarm Mode, or Countdown Timer Mode, and when adjusting day indicator alignment.
E-4
Using the Crown
Pull out the crown before rotating it.
To pull out, rotate, or push the crown in
Pull out Rotate Push in
Note
x If you do not perform any operation for more than two minutes after pulling out the crown, crown
operations will become disabled automatically. If this happens, push the crown back in and then pull it
out again to re-enable crown operations.
x Button operations may become disabled after you perform a crown operation. If this happens, rotate
the crown slightly. This should restore button operations.
High-speed Movement
When rotating the crown to move the hands of the watch, you can use the operations described below
to move the hands at high speed, either forward or back. There are two high-speed levels: HS1 and HS2
(faster than HS1).
E-3
About This Manual
Operations are performed using the watch’s crown, and the three buttons
indicated by the letters A, B and C in this manual.
Hands and Indicators
1
Hour Hand
2
Second Hand
3
Minute Hand
4
Upper Dial Hand: Indicates a time, in 24-hour format, depending on the
current mode.
5
Lower Dial Hand: Indicates the current mode.
6
Day Indicator
This User’s Guide uses numbers shown above to identify watch hands and
indicator.

E-2
Applications
This watch has built-in sensors that measure direction.
Measurement results are indicated by the watch’s hands and displays. This feature makes this watch
useful when hiking, mountain climbing, or when engaging in other such outdoor activities.
Warning!
x The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered as
reasonable representations only.
x When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
x Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered
by you or any third party arising through the use of this product or its malfunction.
Important!
x Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or
other activities, always be sure to take along another compass to confi rm readings. If the readings
produced by the digital compass of this watch are different from those of the other compass, perform
bidirectional calibration of the digital compass to ensure more accurate readings.
x Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of
a permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or
electrical household appliances (TV, computer, cellphone, etc.)
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
x Note that the product illustrations in this manual are intended for reference only, and so the actual product
may appear somewhat different than depicted by an illustration.
This watch does not have a city code that corresponds to the UTC offset of –3.5 hours. Because of
this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland,
Canada.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by
you or any third party arising through the use of your watch or its malfunction.
MA1410-EA
© 2014 CASIO COMPUTER CO., LTD.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5394 - OCW-P1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5394 - OCW-P1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info