624482

Casio 5302 - GA-1000 Handleiding

4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
E-24
2. Place the watch on a level surface facing any direction you want, and press
C
to calibrate the fi rst
direction.
• --- will be shown in the lower display while fi rst direction calibration is in progress. When
calibration is successful, OK will appear in the upper display for a short while, and then change
to
. The lower display will show -2-. These indicate that the watch is ready for calibration of the
second direction.
3. Rotate the watch 180 degrees.
4. Press
C
again to calibrate the second direction.
• --- will be displayed in the lower display while calibration is in progress.
• After calibration is successful, the upper display will show OK and then the watch will return to the
Digital Compass Mode.
• ERR will appear on the upper display for a short while if an error occurs. After that, the screen will
automatically return to the fi rst direction calibration screen (the one that appears after
A
is held
down in step 1).
E-25
To perform magnetic declination correction
1. In the Digital Compass Mode, hold down
A
.
• The second hand will move to 12 o’clock, indicating the bidirectional
calibration mode.
2. Press
D
to enter the magnetic declination correction mode.
• The upper display will show the current magnetic declination
direction, and the lower display will show the current magnetic
declination angle value.
3. Use
E
(East) and
B
(West) to change the settings.
•
The following explains magnetic declination angle direction
settings.
OFF
: No magnetic declination correction performed. The magnetic
declination angle with this setting is 0°.
E
: When magnetic north is to the east (east declination)
W
: When magnetic north is to the west (west declination)
• You can select a value within the range of W 90° to E 90° with these settings.
• You can turn off (OFF) magnetic declination correction by pressing
E
and
B
at the same time.
• The illustration, for example, shows the value you should input and the direction setting you should
select when the map shows a magnetic declination of 1° West.
4. When the setting is the way you want, press
A
to exit the setting screen.
Magnetic declination direction
(E, W, or OFF)
Magnetic declination
angle value
Magnetic declination direction
(E, W, or OFF)
Magnetic declination
angle value
E-26
Using Bearing Memory
Bearing Memory lets you temporarily store and display a direction
reading so you can use it as a reference as you take subsequent digital
compass readings. Accessing the Bearing Memory data displays the
direction angle for the stored reading in the lower display, along with an
indicator in Digital Meter A (page E-27) that shows the stored bearing.
If you perform a digital compass operation while Bearing Memory data is
displayed, the direction angle of the current digital compass reading (as
read from the 12 o’clock position of the watch) will be shown in the lower
display and the stored Bearing Memory direction reading will be shown in
the upper display.
To store a direction angle reading in Bearing Memory
1. Press
C
to start a digital compass operation (page E-20).
• This will take an initial reading and then take readings every
second for 20 seconds.
• If a bearing memory direction angle value is already displayed in
the lower display, it means that there is a reading already stored
in Bearing Memory. If this happens, press
E
to clear the Bearing
Memory reading and exit the bearing memory screen before
performing the above step.
2. During the 20 seconds that digital compass readings are being taken, press
E
to store the current
reading in Bearing Memory.
• The Bearing Memory direction angle fl ashes for about one second in the lower display as it is
stored in Bearing Memory. After that, the angle value will stop fl ashing (indicating that it is Bearing
Memory data), and a new 20-second direction reading operation will start.
12 o’clock
position
Bearing Memory
Pointer
North pointer
Direction angle
of current
reading
Bearing Memory Data
Bearing memory
direction angle
value
12 o’clock
position
Bearing Memory
Pointer
North pointer
Direction angle
of current
reading
Bearing Memory Data
Bearing memory
direction angle
value
E-27
• You can press
C
at any time while the Bearing Memory angle value is displayed, to start a new
20-second direction reading operation. Doing so will display the direction angle for the direction
that the 12 o’clock position of the watch is pointed. The direction angle of the current reading will
disappear from the display after the 20-second direction reading operation is complete.
• The direction stored in Bearing Memory is indicated by Digital Meter A in the following cases only.
– During the fi rst 20 seconds after you display Memory data
– During a direction reading operation triggered by pressing
C
while Bearing Memory data is
displayed in the upper display
• Pressing
E
while the Bearing Memory data is displayed will clear the reading currently in Bearing
Memory and start a new 20-second direction reading operation.
Bearing Memory Pointer
Digital Meter A indicates the bearing stored for a Bearing Memory record.
Bearing straight ahead
Bearing display area (Indicates a bearing within ±60° of 0.)
Bearing outside of display area (Bearing more than 60° left of 0.)
Bearing outside of display area (Bearing more than 60° right of 0.)
Bearing straight back
E-28
• To position yourself to move in the direction of the recorded bearing, move around until the Bearing
Memory Pointer points straight ahead of you, as shown above.
Using the Digital Compass While Mountain Climbing or Hiking
This section shows three actual examples of how to use the watch’s digital compass.
• Setting a map and fi nding your current location
Having an idea of your current location is important when mountain climbing or hiking. To do this, you
need to “set the map”, which means to align the map so the directions indicated on it are aligned with
the actual directions of your location. Basically what you are doing is aligning north on the map with
north as indicated by the watch.
• Finding the bearing to an objective
• Determining the direction angle to an objective on a map and heading in that direction
E-29
To set a map and fi nd your current location
1. With the watch on your wrist, position it so the face is horizontal.
2. While in any mode (except a setting mode), press
C
to take a compass reading.
• Direction readings are taken every second for 20 seconds.
3. Rotate the map without moving the watch so the northerly direction
indicated on the map matches north as indicated by the watch.
• If the watch is confi gured to indicate magnetic north, align the
map’s magnetic north with the watch indication. If the watch has
been confi gured with a declination to correct to true north, align
the map’s true north with the watch indication. For details, see
“Calibrating the Bearing Sensor” (page E-22).
• This will position the map in accordance with your current location.
4. Determine your location as you check the geographic contours around
you.
N
N
North indicated
on the map
North indicated by
north pointer
N
N
North indicated
on the map
North indicated by
north pointer
E-30
To fi nd the bearing to an objective
1. With the watch on your wrist, position it so the face is horizontal.
2. Set the map so its northerly indication is aligned with north as indicated
by the watch, and determine your current location.
• See “To set a map and fi nd your current location” on page E-29 for
information about how to perform the above step.
3. Next, set the map so the direction you want to travel on the map is
pointed straight in front of you.
4. While in any mode (except a setting mode), press
C
to take a
compass reading.
• The reading will appear on the upper display after about two
seconds.
5. Still holding the map in front of you, turn your body until north as
indicated by the watch and the northerly direction on the map are
aligned.
• This will position the map in accordance with your current location,
so the bearing to your objective is straight ahead of you.
N
N
Objective
Current
location
12 o’clock
position
N
N
Objective
Current
location
12 o’clock
position
E-31
To determine the direction angle to an objective on a map and head in that direction (Bearing Memory)
1. Set the map so its northerly indication is aligned with north as indicated
by the watch, and determine your current location.
• See “To set a map and fi nd your current location” on page E-29 for
information about how to perform the above step.
2. As shown in the illustration to the left, change your position so you (and
the 12 o’clock position of the watch) are pointed in the direction of
objective, while keeping the northerly direction indicated on the map
aligned with north as indicated by the watch.
• If you fi nd it diffi cult to perform the above step while keeping
everything aligned, fi rst move into the correct position (12 o’clock
position of the watch pointed at the objective) without worrying
about the orientation of the map. Next, perform step 1 again to set
the map.
N
N
Objective
Current
location
12 o’clock
position
N
N
Objective
Current
location
12 o’clock
position
Operation Guide 5302
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Casio-5302---GA-1000

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5302 - GA-1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5302 - GA-1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 5302 - GA-1000

Casio 5302 - GA-1000 Gebruiksaanwijzing - Deutsch - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info