624882
7
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Operation Guide 5266
E-36
Using Moon Data
The Moon Age Mode displays a value that indicates the current date’s Moon age. The value
indicates the Moon age at sunset on the current date.
To look up the Moon age on a specifi c date
1. In the Timekeeping Mode, press
C
twice to enter Moon Age Mode.
This will cause MOON AGE to appear on the digital display for
about one second. After that the current year, month, and day
appears for about one second.
Next, CALC will appear on the digital display indicating that
Moon age calculation is in progress. After the calculation is
complete, the Moon age value for the current date will appear.
2. While a Moon age value is displayed you can use the
D
(+) and
B
(–) buttons to scroll from day to day.
Scrolling to another day will cause CALC to appear on the digital
display for one second indicating that Moon age calculation is in
progress. The Moon age for the selected data will appear when
calculation is complete.
Hold down
C
for two seconds to return to the Timekeeping Mode.
Note
Moon age is calculated to an accuracy of ±1 day.
Moon Data
The Moon age information that appears when you enter the Moon Age Mode is for sunset on the
current date as kept in the Timekeeping Mode in accordance with your Home City setting. After
that, you can scroll to another date and check the Moon age on that date.
If the Moon data is not correct, check your Timekeeping Mode settings and correct them if
necessary.
Moon age
E-37
Thermometer
This watch uses a temperature sensor to take temperature readings.
To enter and exit the Thermometer Mode
1. In the Timekeeping Mode, press
C
three times to enter
Thermometer Mode.
This will cause THERMO to appear on the digital display for
about one second indicating that temperature readings are
being taken. After that, the measurement result will appear.
The watch will take a temperature reading every fi ve seconds for
one or two minutes.
2. Hold down
C
for about two seconds to return to the Timekeeping
Mode.
If you do not perform any button operation for one or two
minutes after temperature measurement is complete, the watch
will automatically return to the Timekeeping Mode.
Temperature
Temperature is displayed in units of 0.1°C (or 0.2°F).
The displayed temperature value changes to
--.-
°C (or °F) if a measured temperature falls
outside the range of –10.0°C to 60.0°C (14.0°F to 140.0°F). The temperature value will reappear
as soon as the measured temperature is within the allowable range.
Display Units
You can select either Celsius (°C) or Fahrenheit (°F) for the displayed temperature value. See “To
specify temperature unit” (page E-40) for more information.
Temperature
E-38
Temperature Sensor Calibration
The watch’s temperature sensor is calibrated at the factory and normally requires no further
adjustment. If you notice serious errors in the temperature readings produced by the watch, you
can calibrate the sensor to correct the errors.
Important!
Incorrectly calibrating the temperature sensor can result in incorrect readings.
Carefully read the following before doing anything.
– Compare the readings produced by the watch with those of another reliable and accurate
thermometer.
– If adjustment is required, remove the watch from your wrist and wait for 20 or 30 minutes to
give the temperature of the watch time to stabilize.
To correct the temperature value
1. You can correct the temperature readings displayed by the watch in
accordance with another measuring instrument for more accurate
readings.
2. In the Timekeeping Mode, press
C
three times to enter
Thermometer Mode.
3. Hold down
A
until the current temperature value fl ashes on the
digital display. This is the setting screen.
4. Use
D
(+) and
B
(–) to calibrate the temperature value with the reading of another instrument.
Each press of a button changes the temperature value in units of 0.1°C (0.2°F).
To return the currently fl ashing value to its initial factory default setting, press
B
and
D
at
the same time. OFF will appear at the fl ashing location for about one second, followed by
the initial default value.
5. Press
A
to return to the Thermometer Mode.
E-39
Thermometer Precautions
Temperature measurements are affected by your body temperature (while you are wearing the
watch), direct sunlight, and moisture. To achieve a more accurate temperature measurement,
remove the watch from your wrist, place it in a well ventilated location out of direct sunlight, and
wipe all moisture from the case. It takes approximately 20 to 30 minutes for the case of the
watch to reach the actual surrounding temperature.
When taking temperature readings, it is best to remove the watch from your wrist in order to
eliminate the effects of body heat. Remove the watch from your wrist and allow it to hang freely
from your bag or in another location where it is not exposed to direct sunlight.
E-40
Specifying Temperature Unit
Use the procedure below to specify the temperature unit to be used in the Thermometer Mode.
Important!
When
TOKYO
is selected as the Home City, the temperature unit is
set automatically to Celsius (
°C
). These settings cannot be changed.
To specify the temperature unit
1. Enter the Thermometer Mode and then hold down
A
for about two
seconds until the current temperature value fl ashes on the digital
display. This is the setting screen.
2. Press
C
to display the temperature unit setting screen with either
°C
or
°F
(the current unit setting) will be fl ashing.
3. Press
D
to toggle the temperature unit between
°C
(Celsius) and
°F
(Fahrenheit).
4. After the setting is the way you want, press
A
to exit the setting
screen.
E-41
Using the Alarm
You can set fi ve independent daily alarms. When a daily alarm is
turned on, an alarm tone will sound for about 10 seconds each day
when the time in the Timekeeping Mode reaches the preset alarm time.
This is true even if the watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will cause the
watch to beep twice every hour on the hour.
To enter the Alarm Mode
Use
C
to select the Alarm Mode (
ALARM
) as shown on page E-8.
ALARM
will appear on the digital display for about one second.
After that, the digital display will show the current alarm time and
alarm number (
–1
to
–5
), or the hourly time signal setting. In the
case of an alarm, the digital display alternates at one-second
intervals between the alarm number and the on/off setting screen.
The alarm number indicates an alarm screen.
SIG
is shown when
the Hourly Time Signal screen is on the digital display.
When you enter the Alarm Mode, the data you were viewing when
you last exited the mode appears fi rst.
Alarm time
(Hour : Minutes) or SIG
Alternates
(1 second)
Alarm
number
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5266 - CPW-500H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5266 - CPW-500H in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info