616010
1
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
MO1503-EA
© 2015 CASIO COMPUTER CO., LTD.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measured values are then shown on the display. Such features make this watch useful when hiking,
mountain climbing, or when engaging in other such outdoor activities.
Warning !
The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
E-2
Important!
The watch’s Altimeter Mode calculates and displays relative altitude based on barometric pressure
readings produced by its pressure sensor. This means that readings taken at different times at the
same location may produce different altitude values due to changes in barometric pressure. Also note
that the value displayed by the watch may be different from the actual elevation and/or sea level
elevation indicated for the area where you are located.
When using the altimeter of this watch for mountain climbing or other activities, it is highly
recommended that you check a map, local altitude indications, or some other source for your current
correct altitude and regularly calibrate the altimeter with the latest information. For more information,
see “To specify a reference altitude value” (page E-47).
Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other
activities, be sure always to take along another compass to confi rm readings. If the readings produced
by the digital compass of this watch are different from those of the other compass, perform bidirectional
calibration of the digital compass to ensure more accurate readings.
Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a
permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or
electrical household appliances (TV, computer, cellphone, etc.)
E-3
About This Manual
Depending on the model of your watch, digital display text appears
either as dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
Button operations are indicated using the letters shown in the
illustration.
Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-4
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City and summer time settings” (page E-14) to confi gure
your Home City and daylight saving time settings.
Important!
World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings
in the Timekeeping Mode. Make sure you confi gure these settings correctly.
2. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-16).
The watch is now ready for use.
E-5
Contents
About This Manual …………………………………………………………………………………………… E-3
Things to check before using the watch ………………………………………………………………… E-4
Mode Reference Guide ……………………………………………………………………………………… E-9
Timekeeping ………………………………………………………………………………………………… E-13
Confi guring Home City Settings ………………………………………………………………………… E-14
To confi gure Home City and summer time settings ……………………………………………… E-14
Confi guring Current Time and Date Settings ………………………………………………………… E-16
To change the current time and date settings …………………………………………………… E-16
Taking Direction Readings ……………………………………………………………………………… E-19
To take a direction reading ………………………………………………………………………… E-19
To perform bidirectional calibration ………………………………………………………………… E-23
To perform magnetic declination correction ……………………………………………………… E-24
To store a direction angle reading in Bearing Memory ………………………………………… E-25
Specifying Temperature, Barometric Pressure, and Altitude Display Units …………………… E-29
To specify temperature, barometric pressure, and altitude display units ……………………… E-29
Taking Barometric Pressure and Temperature Readings ………………………………………… E-31
To take barometric pressure and temperature readings ………………………………………… E-31
To enable or disable the barometric pressure change alert …………………………………… E-37
To calibrate the pressure sensor and the temperature sensor ………………………………… E-38
E-6
Using the Altimeter Mode ………………………………………………………………………………… E-40
To select the altitude screen format ……………………………………………………………… E-42
To select the altitude auto reading interval ……………………………………………………… E-43
To take altitude readings …………………………………………………………………………… E-45
To specify a reference altitude value ……………………………………………………………… E-47
To specify the altitude differential start point ……………………………………………………… E-48
To use the altitude differential value ……………………………………………………………… E-49
To save a reading manually ………………………………………………………………………… E-50
To start trek log value updating …………………………………………………………………… E-53
To stop trek log value updating …………………………………………………………………… E-53
Viewing Altitude Records ………………………………………………………………………………… E-58
To view altitude records …………………………………………………………………………… E-58
To delete all manually saved data ………………………………………………………………… E-62
To delete data in a specifi c memory area ………………………………………………………… E-62
Looking up Sunrise and Sunset Times ………………………………………………………………… E-64
To enter the Sunrise/Sunset Mode ………………………………………………………………… E-64
To view the sunrise/sunset time for a particular date …………………………………………… E-65
To look up the sunrise and sunset times for a specifi c location ………………………………… E-66
Using the Stopwatch ……………………………………………………………………………………… E-68
To enter the Stopwatch Mode ……………………………………………………………………… E-68
To perform an elapsed time operation …………………………………………………………… E-68
To pause at a split time ……………………………………………………………………………… E-68
To measure two fi nishes …………………………………………………………………………… E-69
E-7
Using the Countdown Timer ……………………………………………………………………………… E-70
To enter the Countdown Timer Mode ……………………………………………………………… E-70
To specify the countdown start time ……………………………………………………………… E-70
To perform a countdown timer operation ………………………………………………………… E-71
To stop the alarm …………………………………………………………………………………… E-71
Using the Alarm …………………………………………………………………………………………… E-72
To enter the Alarm Mode …………………………………………………………………………… E-72
To set an alarm time ………………………………………………………………………………… E-73
To turn an alarm and the Hourly Time Signal on and off………………………………………… E-74
To stop the alarm …………………………………………………………………………………… E-75
Checking the Current Time in a Different Time Zone ………………………………………………… E-76
To enter the World Time Mode …………………………………………………………………… E-76
To view the time in another time zone …………………………………………………………… E-76
To specify standard time or daylight saving time (DST) for a city ……………………………… E-77
Illumination ………………………………………………………………………………………………… E-78
To turn on illumination manually …………………………………………………………………… E-78
To change the illumination duration ……………………………………………………………… E-78
To turn the auto light switch on and off …………………………………………………………… E-80
Button Operation Tone …………………………………………………………………………………… E-82
To turn the button operation tone on and off ……………………………………………………… E-82
Operation Guide 3439
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Casio-3439

Zoeken resetten

  • Ik heb de batterij vernieuwt maar nu doet de baro en de temperatuur meter het niet meer en geeft altijd arro aan wat moet ik doen mijn tijpe is 3439 Gesteld op 5-7-2021 om 20:50

    Reageer op deze vraag Misbruik melden
  • ik kan de handleiding van model 3454 niet vinden.

    vriendelijke groet Leendert van den Akker Gesteld op 9-6-2021 om 13:54

    Reageer op deze vraag Misbruik melden
  • hoe kan ik temperatuur omzetten van F in C op casio 1000 2ber Gesteld op 4-1-2020 om 21:35

    Reageer op deze vraag Misbruik melden
    • In tijdmodus knop linksboven ingedrukt houden tot display gaat knipperen, knop linksonder 11x indrukken tot unit verschijnt. Met knop rechtsboven wisselen tussen Celsius en Fahrenheit. Eindigen met 2x linksboven indrukken. Geantwoord op 30-3-2021 om 17:00

      Waardeer dit antwoord Misbruik melden
  • Graag een Nederlands talige handleiding voor dit type Casio sgw 1000 2-ber Gesteld op 26-5-2017 om 09:33

    Reageer op deze vraag Misbruik melden
    • Heb ik ook verleden jaar gevraagd, maar wordt niet geleverd. Wel in de meestvreemde talen van arme landen, kennelijk wordt daar toch meer omgezet dan wij denken! Geantwoord op 27-6-2017 om 14:09

      Waardeer dit antwoord (5) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 3439 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 3439 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 3439

Casio 3439 Gebruiksaanwijzing - Deutsch - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info