624519
4
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
Operation Guide 3403
E-39
Using the Timer in the Timekeeping Mode
To start a timer countdown
In the Timekeeping Mode, press
D
.
This will cause the day of the week and day display to change to a timer display.
Timer indicator
Timer
D
E-38
To perform a countdown
The following shows button operations for a countdown.
D
D D D B
Start Stop (Restart) (Stop) Reset
Note
A tone/vibration alert is performed for about 10 seconds when the end of the
x
countdown is reached, and the display returns to the screen that was shown
before the countdown was started.
Even if you exit the Timer Mode while a timer countdown is ongoing, the
x
countdown will continue and the tone/vibration alert operation will be performed
when the end of the countdown is reached.
A timer indicator fl ashes while a countdown operation is in progress.
x
E-37
Use
3
B
and
D
to change the currently selected setting (hours, minutes, or
seconds).
Holding down either button scrolls the setting at high speed.
x
To specify a start time of 24 hours, set the timer to 0H 00'00". x
After all the settings are the way you want, press
4
A
to exit the setting
screen.
E-36
To set the timer start time
In the Timer Mode, hold down
1
A
for about two seconds.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hours digits will fl ash.
Note
If a timer countdown operation is in progress, press
x
D to stop it and then press B to reset the timer to
its start time before performing the above step.
If a timer countdown operation is paused, press
x B
to reset the timer to its start time before performing
the above step.
Use
2
C
to move the fl ashing between the hours, minutes, and seconds.
The fl ashing digits are the ones that are selected.
E-35
To enter the Timer Mode
In the Timekeeping Mode, press
C
four
times to enter the Timer Mode.
See “Using Modes” (page E-12).
Seconds
Minutes 1/10 second
Hours
Current time
E-34
Timer
The timer start time can be set in one-second increments up to 24 hours. The watch
will sound a tone and fl ash its display illumination, or it will vibrate when the end of
the timer countdown is reached.
See “To change the alarm/timer alert method” (page E-44).
Note
You can start a timer countdown operation while in the Timekeeping Mode.
See “Using the Timer in the Timekeeping Mode” (page E-39) for more information.
E-33
Note
Once started, elapsed time measurement continues until you press
x D to stop
it, even if you change to a different mode and even if the stopwatch reaches the
elapsed time measurement limit.
If you change to another mode while a split time is frozen on the display, split time
x
display will be canceled.
E-32
To measure time with the stopwatch
The following shows button operations for stopwatch operations.
Elapsed time/cumulative time x
D D D D B
Start Stop (Restart) (Stop) Reset
Split time (paused elapsed time reading) x
D B B D B
Start Split Split time display
cancel
Stop Reset
Pressing B while timing is being performed displays the split time (with [SPLIT]
ashing), but elapsed timing continues internally.
E-31
Stopwatch
The stopwatch measures elapsed time in units of 1/100 seconds up to 999 hours,
59 minutes, 59.99 seconds. Elapsed time returns to zero automatically and timing
continues from there when the maximum limit is reached.
To enter the Stopwatch Mode
In the Timekeeping Mode, press
C
three
times to enter the Stopwatch Mode.
See “Using Modes” (page E-12).
[STW] will appear on the display for about
one second, and then the stopwatch screen
will appear.
Seconds
Minutes 1/100 second
Hours
Current time
E-30
After all the settings are the way you want, press
6
A
to exit the setting
screen.
To return to the Timekeeping Mode, press
7
C
three times.
To stop a tone/vibration alert operation
Pressing any one of the buttons will stop an ongoing tone/vibration alert
operation.
To test the alarm
In the Alarm Mode, hold down
D
to perform the tone/vibration alert
operations.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 3403 - GD-350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 3403 - GD-350 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 3403 - GD-350

Casio 3403 - GD-350 Gebruiksaanwijzing - Deutsch - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info