624855
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
8
Operation Guide 3173 3246
To confi gure longitude and latitude settings
1. In the Timekeeping Mode, hold down
E
until the currently selected
city code starts to fl ash. This is the city code setting screen.
Before the city code starts to fl ash, the message SET Hold
will appear on the display. Keep
E
depressed until SET Hold
disappears and the city code starts to fl ash.
2. Press
E
to display the longitude/latitude setting screen, with the
latitude setting fl ashing.
3. Use
D
to move the fl ashing between the latitude and the longitude
setting.
4. Use
A
(+) and
C
(–) to change the fl ashing setting.
You can configure the longitude and latitude setting within
following ranges.
Latitude Range: 65°S (South 65 degrees) to 0°N – 65°N (North 65
degrees)
Longitude Range: 179°W (West 179 degrees) to 0°E – 180°E (East
180 degrees)
Latitude and longitude values are rounded off to the nearest
degree.
You can fi nd latitude and longitude for various cities around the
globe in the “Site Data List”.
5. Press
E
to return to the Timekeeping Mode.
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 31 time zones (48 cities) around the
globe. The city that is currently selected in the World Time Mode is called the “World Time City”.
To enter the World Time Mode
Use
D
to select the World Time Mode (
WT
) as shown in “Selecting a
Mode”.
About one second after
WT
appears on the display, the display will
change to show the city code of the currently selected World Time City.
The two pointers described below are on the display in the World Time
Mode.
Pointer 1 (not fl ashing): Indicates the current time in the currently
selected World Time City in 24-hour format.
Pointer 2 (fl ashing): Indicates the current Timekeeping Mode time in
24-hour format.
To view the time in another time zone
In the World Time Mode, use
A
(East) and
C
(West) to scroll through city codes.
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, use
A
(East) and
C
(West) to display the
city code (time zone) whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down
E
until
DST Hold
appears on the display and then
disappears. Release
E
after
DST Hold
disappears.
This toggles the city code you selected in step 1 between Daylight
Saving Time (DST indicator displayed) and standard time (DST
indicator not displayed).
Using the World Time Mode to change the DST setting of the
city code that is selected as your Home City also will change the
Timekeeping Mode time DST setting.
Note that you cannot switch between standard time/daylight
saving time (DST) while UTC is selected as the World Time City.
Note that the standard time/daylight saving time (DST) setting
affects only the currently selected time zone. Other time zones are
not affected.
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use
D
to select the Stopwatch Mode (
STW
) as shown in “Selecting a
Mode”.
About one second after
STW
appears on the display, the display will
change to show the stopwatch hours.
To perform an elapsed time operation
A
A
A A
C
Start Stop (Restart) (Stop) Reset
To pause at a split time
A
C
C A
C
Start Split
(
SPL
displayed)
Split release Stop Reset
To measure two fi nishes
A
C
A C
C
Start Split
First runner fi nishes.
Display time of fi rst
runner
Stop
Second runner
nishes.
Split release
Display time of
second runner
Reset
Note
The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.99 seconds.
Once started, stopwatch timing continues until you press
C
to stop it, even if you exit the Stopwatch
Mode to another mode and even if timing reaches the stopwatch limit defi ned above.
Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns
to elapsed time measurement.
Latitude
Longitude
Press D.
Latitude
Longitude
Press D.
Pointer 1
Currently selected
World Time City
Current time in the
currently selected
World Time City
Pointer 2
Current
Timekeeping
Mode time
Pointer 1
Currently selected
World Time City
Current time in the
currently selected
World Time City
Pointer 2
Current
Timekeeping
Mode time
DST indicatorDST indicator
Hours
1/100 second
Seconds
Minutes
Current
time
Hours
1/100 second
Seconds
Minutes
Current
time
Using the Countdown Timer
The countdown timer can be confi gured to start at a preset time, and sound an alarm when the end of the
countdown is reached.
To enter the Countdown Timer Mode
Use
D
to select the Countdown Timer Mode (
TMR
) as shown in “Selecting a
Mode”.
About one second after
TMR
appears on the display, the display will
change to show the countdown time hours.
To specify the countdown start time
1. Enter the Countdown Timer Mode.
If a countdown is in progress (indicated by the seconds counting
down), press
A
to stop it and then press
C
to reset to the current
countdown start time.
If a countdown is paused, press
C
to reset to the current
countdown start time.
2. Hold down
E
until the hour setting of the current countdown start time
starts to fl ash. This is the setting screen.
Before the hour setting starts to fl ash, the message SET Hold
will appear on the display. Keep
E
depressed until SET Hold
disappears and the hour setting starts to fl ash.
3. Press
D
to move the fl ashing between the hour and minute settings.
4. Use
A
(+) and
C
(–) to change the fl ashing item.
To set the starting value of the countdown time to 24 hours, set 0H 00’00.
5. Press
E
to exit the setting screen.
To perform a countdown timer operation
A
A
A A
C
Start Stop (Restart) (Stop) Reset
Before starting a countdown timer operation, check to make sure that a countdown operation is not in
progress (indicated by the seconds counting down). If it is, press
A
to stop it and then
C
to reset to
the countdown start time.
An alarm sounds for fi ve seconds when the end of the countdown is reached. This alarm will sound in
all modes. The countdown time is reset to its starting value automatically when the alarm sounds.
To stop the alarm
Press any button.
Using the Alarm
You can set fi ve independent daily alarms. When an alarm is turned on,
an alarm will sound for about 10 seconds each day when the time in the
Timekeeping Mode reaches the preset alarm time. This is true even if the
watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will cause the watch
to beep twice every hour on the hour.
To enter the Alarm Mode
Use
D
to select the Alarm Mode (
ALM
) as shown in “Selecting a Mode”.
About one second after
ALM
appears on the display, the display will
change to show an alarm number (
AL1
through
AL5
) or the
SIG
indicator. The alarm number indicates an alarm screen.
SIG
is shown
when the Hourly Time Signal screen is on the display.
When you enter the Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
To set an alarm time
1. In the Alarm Mode, use
A
and
C
to scroll through the alarm screens
until the one whose time you want to set is displayed.
AL1 AL2 AL3
SIG AL5
AL4
2. Hold down
E
until the alarm time starts to fl ash. This is the setting
screen.
Before the alarm time starts to fl ash, the message SET Hold
will appear on the display. Keep
E
depressed until SET Hold
disappears and the alarm time starts to fl ash.
3. Press
D
to move the fl ashing between the hour and minute settings.
4. While a setting is fl ashing, use
A
(+) and
C
(–) to change it.
When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no
indicator) or p.m. (P indicator).
5. Press
E
to exit the setting screen.
To test the alarm
In the Alarm Mode, hold down
A
to sound the alarm.
To turn an alarm and the Hourly Time Signal on and off
1. In the Alarm Mode, use
A
and
C
to select an alarm or the Hourly
Time Signal.
2. When the alarm or the Hourly Time Signal you want is selected, press
B
to turn it on and off.
The alarm on indicator and the Hourly Time Signal on indicator are
shown on the display in all modes while these functions are turned on.
If any alarm is on, the alarm on indicator is shown on the display in
all modes.
To stop the alarm
Press any button.
Current time
Countdown time
(Hour, minutes,
seconds)
Current time
Countdown time
(Hour, minutes,
seconds)
Alarm
number or
SIG
Alarm time
(Hour : Minutes)
Current time
Alarm
number or
SIG
Alarm time
(Hour : Minutes)
Current time
Alarm ON/OFF
indicator
Alarm ON/OFF
indicator
Module 3173
Module 3246
Hourly time signal
on indicator
Alarm on indicator
Module 3173
Module 3246
Hourly time signal
on indicator
Alarm on indicator
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 3246 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 3246 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 3246

Casio 3246 Gebruiksaanwijzing - Nederlands - 11 pagina's

Casio 3246 Gebruiksaanwijzing - Deutsch - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info