586141
2
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
Operation Guide 3134 3205
2
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting
accordingly.
This watch is designed to pick up the time calibration signals transmitted in
Germany (Mainflingen), England (Anthorn), the United States (Fort Collins)
and Japan.
See the information under Signal Reception Troubleshooting if you
experience problems with time calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in accordance with a time
calibration signal. You also can perform a manual procedure to set the time
and date, when necessary.
The first thing you should do after purchasing this watch is to specify
your Home City (the city where you normally will use the watch). For
more information, see To specify your Home City.
When using the watch outside the areas covered by the time signal
transmitters, you will have to adjust the current time setting manually as
required. See Timekeeping for more information about manual time
settings.
The U.S. time calibration signal can be picked up by the watch while in
North America. The term North America in this manual refers to the area
that consists of Canada, the continental United States, and Mexico.
Using this watch in a country covered by a time calibration that is different
from the countries it supports may result in incorrect time indication due to
local application of summer time, etc.
To specify your Home City
1. In the Timekeeping Mode, hold down E until
the city code starts to flash, which indicates
the setting screen.
2. Press A (east) and C (west) to select the
city code you want to use as your Home City.
LON : London
PAR, BER : Paris, Berlin, Milan, Rome,
Amsterdam, Hamburg, Frankfurt,
Vienna, Barcelona, Madrid
ATH : Athens
HKG, TYO, SEL : Hong Kong, Tokyo, Seoul
HNL : Honolulu
ANC : Anchorage, Nome
LAX : Los Angeles, San Francisco, Las Vegas, Seattle/Tacoma,
Vancouver, Tijuana
DEN : Denver, El Paso, Edmonton, Culiacan
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
City code
Hour :
Minute
PM indicator
Second
Month – Day
CHI : Chicago, Houston, Dallas/Fort Worth, New Orleans, Winnipeg,
Mexico City
NYC: New York, Detroit, Miami, Boston, Montreal
For full information on city codes, see the City Code Table.
Note that this watch does not have a city code that corresponds to
Newfoundland.
3. Press E to exit the setting screen.
Normally, your watch should show the correct time as soon as you select
your Home City code. If it does not, it should adjust automatically after the
next auto receive operation (in the middle of the night). You also can
perform manual receive or you can set the time manually.
The watch will receive the time calibration signal automatically from the
applicable transmitter (in the middle of the night) and update its settings
accordingly. For information about the relationship between city codes and
transmitters, see Time Calibration Signal Reception and Transmitters.
See the maps under Approximate Reception Ranges for information about
the reception ranges of the watch.
Under factory default settings, auto receive is turned off for all of the
following city codes: HKG (Hong Kong), HNL (Honolulu), and ANC
(Anchorage). For details about turning on auto receive for these city codes,
see To turn auto receive on and off.
You can disable time signal reception, if you want. See To turn auto receive
on and off for more information.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration
signal: auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically
up to six times a day. When any auto receive is successful, the remaining
auto receive operations are not performed. For more information, see About
Auto Receive.
Manual Receive
Manual receive lets you start a time calibration receive operation with the
press of a button. For more information, see To perform manual receive.
Proper signal reception can be difficult or even impossible under the
conditions listed below.
Signal reception normally is better at night than during the day.
Time calibration signal reception takes from two to seven minutes, but in
some cases it can take as long as 14 minutes. Take care that you do not
perform any button operations or move the watch during this time.
Inside or
among
buildings
Inside a
vehicle
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near high-
tension
power lines
Among or
behind
mountains
Near
household
appliances,
office
equipment,
or a mobile
phone
The time calibration signal the watch will attempt to pick up depends on its
current Home City code setting as shown below.
Home City Code
LON,
PA R , BER, ATH
HKG*, TYO, SEL
HNL*, ANC*, LAX,
DEN, CHI, NYC
Frequency
60.0 kHz
77.5 kHz
40.0 kHz
60.0 kHz
60.0 kHz
Transmitter
Anthorn (England)
Mainflingen (Germany)
Fukushima (Japan)
Fukuoka/Saga (Japan)
Fort Collins, Colorado
(United States)
* The areas covered by the HKG, HNL, and ANC city codes are quite far
from the time calibration signal transmitters, and so certain conditions
may cause problems with signal reception.
Anthorn
Mainflingen
1,500 kilometers
500 kilometers
Fort
Collins
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
1,000
kilometers
1,000
kilometers
Fukuoka/Saga
500
kilometers
Fukushima
500
kilometers
Approximate Reception Ranges
U.K. and German Signals U.S. Signal
Japan Signals
Signal reception may not be possible at the distances noted below during
certain times of the year or day. Radio interference also may cause
problems with reception.
Mainflingen (Germany) or Anthorn (England) transmitters: 500
kilometers (310 miles)
Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)
Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310
miles)
Even when the watch is within the reception range of the transmitter, signal
reception will be impossible if the signal is blocked by mountains or other
geological formations between the watch and signal source.
Signal reception is affected by weather, atmospheric conditions, and
seasonal changes.
Important!
When getting ready to receive the time calibration signal, position the watch
as shown in the nearby illustration, with its 12 oclock side facing towards a
window. This watch is designed to receive a time calibration signal late at
night. Because of this, you should place the watch near a window as shown
in the illustration when you take it off at night. Make sure there are no metal
objects nearby.
12 o’clock
or
Make sure the watch is facing the right way.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Casio-3205

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 3205 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 3205 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info