624494
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Operation Guide 3185
E-20
Measuring Units and Ranges
Dive Time
Unit: 1 second
Range: 23:59'59'' (24 hours)
Dive Interval Time
Unit: 1 minute
Range: 47:59' (48 hours)
When the interval time exceeds the above range, interval time measurement
automatically stops and the current interval time disappears from the screen of the
newest diving log record.
About the Interval
The interval is time that elapses between the stop of the last dive and the start of the
next dive. The watch starts an interval measurement whenever you press A at the
end of a dive to reset dive time measurement (page E-22).
Note that the current ongoing interval time is shown on the screen of the newest
record in diving log memory. It is not displayed in the Diving Mode. For information
about viewing diving log records, see page E-24.
E-21
The interval is displayed on the screen of the newest diving log, only while an
interval timing operation is in progress.
Starting and Stopping Dive Time Measurement
Be sure to recharge the battery by exposing the watch
to light before starting a dive.
To start dive time measurement
In the Diving Mode, press D.
To stop dive time measurement
While a dive time measurement operation is in progress,
hold down D for about one second.
Pressing D again without resetting the dive time
measurement will cause timing to resume from where it
was stopped.
E-22
To reset a dive time measurement and start interval measurement
While dive time measurement is stopped, press A.
This creates new diving log record with the currently displayed dive time information
and starts interval measurement. Current ongoing interval measurement is shown
on the screen of the newly created record.
To reset a dive time measurement and exit the Diving Mode
While dive time measurement is stopped, hold down C for about one second.
This creates new diving log record with the currently displayed information and exits
the Diving Mode to the Timekeeping Mode.
See “Diving Log Records” on page E-24 for more information.
E-23
Diving Time Measurement Example
Single dive
DStart DStop
Dive time
0:00'00'' 0:20'13''
Dive interval time
0:00'00''
AReset
Interval measurement is
possible up to 47:59'59''
Multiple dives and intervals
DStart DStop DStart DStop
Dive Time 1 Dive Time 2
Interval 1
0:00'00'' 0:15'10'' 0:00'00'' 0:17'15''
0:00'00''
AReset
0:20'16'' 0:00'00''
AReset
Interval 2
E-24
Important!
Pressing D again after stopping dive time measurement will cause timing to
resume from where it was stopped.
Dive time/interval measurement continues internally if you exit the Diving Mode
without resetting. A diving log record is not created in this case.
Diving Log Records
A new diving log record is created whenever you reset a dive time measurement,
either by pressing A to start interval measurement or by holding down C to exit the
Diving Mode.
Each diving log record includes a log number, the dive time, the dive start date and
time, and the interval prior to the dive (if there was one).
There is enough memory for 10 diving log records. If there are already 10 diving log
records in memory when you perform a reset operation, the oldest record currently
in memory is deleted automatically to make room for the new record.
E-25
To view diving log records
1. In the Timekeeping Mode, press C to enter the Diving Log Recall Mode.
This displays the newest record in memory.
The interval currently being measured is displayed on the screen of the newest
diving log record.
-:--” will appear on the screen if there is no diving log data stored in memory.
If you do not perform any operation for about one or two hours in the Diving Log
Recall Mode, the watch will automatically return to the Timekeeping Mode.
E-26
2. Press D to scroll through the log records, from newer to older.
Log numbers are lower for older log records.
Newest Record
Log record
number
Dive timeDive start
time
Dive interval
time
Log record
number
Dive timeDive start
time
Dive start date
(month, day)
D
E-27
Hold down A
for about three
seconds.
To delete diving log records
In the Diving Log Recall Mode, hold down A for about three seconds.
Keep A depressed for the full three seconds. During this time, message CLR will
flash on the display and then -:--” will appear. Log records will not be deleted if you
release A before -:--” appears.-:--” indicates that all log records have been
deleted.
Note
This procedure deletes all diving log records. Diving log records cannot be deleted
individually.
Note that you cannot delete log records while a diving time measurement operation
is in progress.
E-28
Tide/Moon Data
In the Tide/Moon Data Mode, you can see the current tide and the current date’s
Moon phase for your Home City. You can specify a date and view tide and Moon data
for that date.
See “Moon Phase Indicator” (page E-60) for information about the Moon phase
indicator and “Tide Graph” (page E-63) for information about the tide graph.
All of the operations in this section are performed in the Tide/Moon Data Mode
(page E-11).
Note
It takes about two seconds to calculate tide graph data. You will not be able to
display a setting screen while data calculation is in progress.
Moon age is calculated to an accuracy of ±1 day.
E-29
Tide Data
The tide graph that appears first when you enter the Tide/Moon Data Mode shows the
data at 6:00 a.m. for your currently selected Home City on the current date, according
to the Timekeeping Mode. From there you can specify another date or time.
If the tide data is not correct, check your Timekeeping Mode settings and correct
them if necessary.
The tide graph is displayed in the Timekeeping Mode, the Tide/Moon Data Mode,
and the Diving Mode.
If the watch is in the Diving Mode when there is a transition from one date to the
next, the tide graph contents will not change to reflect the data for the new date. If
you want to update the tide graph, exit and then re-enter the Diving Mode.
If you feel that the information shown by the tide graph is different from actual tide
conditions, you need to adjust the high tide time. See “Adjusting the High Tide Time”
(page E-32) for more information.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 3185 - GF-1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 3185 - GF-1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info