522097
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
1
Operation Guide 2993
MA0604-EB
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)
Hour : Minutes
Day of week
PM indicator
Seconds
Month – Day
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
For full information on city codes, see the “City Code
Table”.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds City Code
Hour
Year MinutesDay
DST
Month
3. When the setting you want to change is flashing, use D and B to change it as
described below.
DST indicator
Screen
50
OFF
P
10:58
6-30
To do this:
Reset the seconds to
00
Toggle between Daylight Saving Time (
ON
)
and Standard Time (
OFF
)
Change the city code
Change the hour or minutes
Change the year
Change the month or day
Do this:
Press D.
Press D.
Use D (east) and B (west).
Use D (+) and B (–).
See “Daylight Saving Time (DST)” for details about the DST setting.
4. Press A to exit the setting screen.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time
(
ON
displayed) and Standard Time (
OFF
displayed).
4. Press A to exit the setting screen.
The DST indicator is on the display while Daylight
Saving Time is turned on.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
With the 12-hour format, the P (PM) indicator appears for times in the range of noon
to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the
range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
The P indicator is not displayed with the Timekeeping Mode time on the Preset
Timer Mode, Countdown Timer Mode, World Time Mode, and Alarm Mode screens.
Timekeepin
g
Mode time
Initial Stopwatch Mode
Screen
Timekeeping Mode Stopwatch Mode Preset Timer Mode Alarm ModeWorld Time ModeCountdown Timer Mode
Press .
General Guide
Press C to change from mode to mode.
In any mode, press L to illuminate the display.
Stopwatch
The stopwatch lets you measure elapsed time. The upper
display and lower display can be used for official timing of
an event or game.
You can configure the watch for beeper alert or vibration
alert. For details about vibration alert, see “Vibration
Alert”.
The measurement range of the upper display is
59 minutes 59 seconds.
The measurement range of the lower display is
99 minutes 59 seconds.
The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C.
Minutes Seconds
Press B to pause and
restart elapsed time
measurement.
Minutes Seconds
This time measurement cannot be
paused.
It shows the total elapsed time
since the timing operation started.
Elapsed Time Screen
This time measurement (1/100
second) cannot be paused.
To measure times with the stopwatch
Elapsed Time
Start
Stop*
1
Re-start
Hold down
Stop*
1
Clear
*1 Elapsed time measurement in the lower display continues.
Using the Watch for Official Timing of a Sport Event
After you set a game or event time, the watch will perform an alert operation (beeper
or vibration) when the time in the lower display reaches that time.
If the event is interrupted for some reason, you can press B to pause and restart
timing in the upper display. The lower display shows the total elapsed time since the
start of the timing operation. You can calculate the total amount of time that play was
interrupted (lost time or injury time) by subtracting the upper display time from the
lower display time.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 2993 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 2993 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 2993

Casio 2993 Gebruiksaanwijzing - Nederlands - 4 pagina's

Casio 2993 Gebruiksaanwijzing - Deutsch - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info