570144
21
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
21 English
A guideline to determine what temperature setting is best for your hair:
This guideline indicates the optimum temperature setting.
Variable temperature adjustment
You can set the temperature with the variable temperature adjustment:
I section : from 60 to 100 degrees
II section : from 100 to 150 degrees
III section : from 150 to 200 degrees
Operating instructions
1. After washing your hair, it’s really important to prepare it for styling. If you use lots of
heated styling tools on your hair use a heat protection spray before you begin styling.
2. Divide your hair into sections, and comb each section through. Use sectioning clips to
clip hair out of the way so you can straighten hair thoroughly.
3. Insert the plug in the socket. Turn the on/off switch to ‘on’ before use.
4. Adjust the temperature regulator to the desired temperature.
5. Place the straightener on a heat resistant surface while they are warming up and during
straightening.
6. The straightener will have reached the set temperature after 60 seconds.
7. Clamp a section of the hair between the straightening plates, as close to the roots
as possible. Gently slide the straightener down your hair shaft to the ends. For more
difficult sections of hair, you may need to do this again. Repeat on all sections of the
hair.
8. Turn the on/off switch to ‘off’ to deactivate the device. Remove the plug from the
socket after use. Hang the straightener on the practical storage ring once it has cooled
down.
16 English 17 English
The mains lead of the appliance must not be replaced. An appliance with a faulty or
damaged mains lead can not be repaired and must be disposed of as waste material.
Have a service provider authorised by the manufacturer inspect the product
to minimise risks.
Use the appliance for its intended purpose only.
Chemical waste: a defective appliance should be rendered unusable. Consult your local
authorities for information about waste disposal regulations.
ThermoCeramic technology
The ceramic coated plates ensure that the hair cuticle lies at once styled. This ensures
that your hair reects light and therefore appears healthy and shiny. The ceramic coating
also acts as a barrier to protect your hair from the high temperature reached by the
element. This minimises damage to the cuticle.
Selecting the correct heat setting
The ThermoCeramic Slimline is designed to reach very high temperatures for use on all
hair types. Most hair types can be styled perfectly without using the highest heat settings.
Where possible, you should always use the lower settings as this is safer and kinder to
your hair.
A guideline to determine what temperature setting is best for your hair:
200°
190°
180°
170°
160°
150°
140°
130°
120°
One straightener for all hair types
From fragile, thin hair to thick curly hair
Hair Types
Fragile:
very thin hair
Thin:
easily styled hair
Normal:
normal texture hair
Curly:
curly hair
Full:
thick to very thick hair
This guideline indicates the optimum temperature setting.
Variable temperature adjustment
You can set the temperature with the variable temperature adjustment:
I section : from 60 to 100 degrees
II section : from 100 to 150 degrees
III section : from 150 to 200 degrees
Operatinginstructions
1. After washing your hair, its really important to prepare it for styling. If you use lots of
heated styling tools on your hair use
a heat protection spray before you begin styling.
2. Divide your hair into sections, and comb each section through. Use sectioning clips to
clip hair out of the way so you can straighten hair thoroughly.
3. Insert the plug in the socket. Turn the on/off switch to ‘on’ before use.
4. Adjust the temperature regulator to the desired temperature.
5. Place the straightener on a heat resistant surface while they
are warming up and during straightening.
6. The straightener will have reached the set temperature after 30 seconds.
7. Clamp a section of the hair between the straightening plates, as close to the roots
as possible. Gently slide the straightener down your hair shaft to the ends. For more
difcult sections of hair, you may need to do this again. Repeat on all sections of
the hair.
8. Turn the on/off switch to ‘off’ to deactivate the device. Remove the plug from the
socket after use. Hang the straightener on the practical storage ring once it has
cooled down.
Cleaningandmaintenance
Over time, you will nd a natural build up on your straightening plates. This can be caused
by natural oils in your hair and styling products and lotions. At the rst sign of build up,
you should clean your straightening plates. To do this, always switch your straightener
off and wait for them to cool down. Wipe with a damp cloth, or a non abrasive cleaning
wipe. Failure to do this may mean the build up becomes burnt onto the straightening
plates and they will become difcult to clean. If your straightening plates do become
discoloured it will NOT affect their performance.
Disconnect the plug of the appliance from the socket outlet. Never submerge the appli-
ance in water. Do not allow dirt or hair products to build up on the appliance. Always
wait for the appliance to cool down thoroughly before cleaning.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carmen CR1090 - THERMOCERAMIC SLIMLINE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carmen CR1090 - THERMOCERAMIC SLIMLINE in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info