583171
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Series
Photo Printer
Start Here
Easy Setup Instructions
1Unpack the Printer 2Prepare the Printer 3Install the FINE Cartridges 4Align the Print Head (FINE Cartridge)
Carefully remove all items from the box.
Documentation and
Software Kit
Photo FINE Cartridge
(CL-52)
Color FINE Cartridge
(CL-51)
Power Cord
PIXMA iP6210D Photo Printer
Remove the shipping tape from the front and back of the
printer.
Open (a) the card slot cover first and (b) the front cover next,
Pull down and remove the protective material on the right
side.
Close the front cover first and the card slot cover next.
Plug the power cord into the back of the printer and connect
the other end to a power outlet.
Press the POWER button. The printer will initialize. Wait until
the POWER lamp remains fully lit.
NOTE: Do not connect the USB cable at this stage.
When the screen appears on the LCD, confirm a language
and then press the OK button.
Open the card slot cover first and the front cover next.
The FINE Cartridge holder automatically moves to the left.
Write down the serial number. You will need this to register
the product.
6
5
4
3
2
1
Take out the Color FINE Cartridge (CL-51) from its box and remove the protective
tape gently.
NOTE:
·Do not touch the electrical contacts or print head nozzles on a FINE Cartridge. The
printer may not print out properly if you touch it.
·Do not reattach the protective tape once you have removed it.
·Handle the removed protective tape carefully to avoid getting your hands dirty or
staining surrounding work area.
Insert the Color FINE Cartridge slightly slanted into the left slot (C).
Push up the Color FINE Cartridge until it clicks into place.
IMPORTANT: For correct printer operation, make sure the FINE Cartridge is secure in
slots.
Repeat the procedure for the Photo FINE Cartridge (CL-52), inserting it into the
right slot (P).
Close the front cover first and the card slot cover next.
IMPORTANT: Wait until the preparatory operation is complete; this takes about one
to two minutes.
The message requesting head alignment is displayed on the LCD.
Go to the next step.
5
4
3
2
1
Open the paper support and pull out the paper output tray.
Pinch the paper guide and slide it to the left. Load a few
sheets of blank paper into the auto sheet feeder, then slide
the paper guide toward the left edge of the paper.
NOTE: Ensure that the paper thickness lever is set to the left
position.
Ensure that the message requesting head alignment is dis-
played on the LCD, select YES using the buttons and
press the OK button.
The pattern is printed. And the print head is aligned
automatically.
IMPORTANT: It takes about four minutes to finish printing.
When automatic print head alignment can not be execut-
ed correctly, the message "HEAD ALIGNMENT ERROR" is
displayed on the LCD. refer to "An Error Message is
Displayed in the LCD" in the Direct Printing Guide.
3
2
1
Print head nozzles
Electrical contacts
Continue with Step 5
on side two.
Power cord
To the FINE Cartridge holder
Paper support
Paper output tray
FINE Cartridge
holder
Paper thickness lever
Protective material
Serial number
Protective tape
(b) Front cover
Paper guide
Print side
Auto sheet feeder
(a) Card slot cover
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon Pixma iP6220D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon Pixma iP6220D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Canon Pixma iP6220D

Canon Pixma iP6220D Gebruiksaanwijzing - English - 60 pagina's

Canon Pixma iP6220D Snelstart handleiding - English - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info