513695
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2, C3).
C1 easy iron key
This function helps reduce creasing, depending on the programme selected and the type
of fabric washed. This works as follows:
Synthetics. Intermediate spins during rinses are eliminated.
Delicates. Intermediate spins during rinses are eliminated and the machine stops before
the final spin, which is a gentle spin.
Woollens. Intermediate spins during rinses are eliminated and the machine stops before
the final spin.
Hand wash. The machine stops before the final spin.
Rinses. Intermediate spins during rinses are eliminated.
To complete the wash cycle in the Delicates, Hand wash, and Woollens programmes, press
the Easy Iron key again: the machine will empty and perform the required spin.
To empty machine of water with no spin, cancel the ongoing programme and select the
empty programme.
C2 extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water
and a combination of drum rotation movements ensure that washing is perfectly rinsed.
The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Woollens,
Sportswear and AA40 programmes.
C 3 super fast key
When this key is engaged programme times are cut by as much as 50 minutes, depending
on the wash programme and temperature selected. The key can be activated only in Cottons,
Synthetics and Mixed programmes.
5.- Select spin speed if required (B)
B spin selector
Use this control to select the maximum spin speed within the range for the model of washing
machine in question and the programme selected (see programme table). The control can
be turned in both directions. Spin speed may be selected at any time during the
programme.
6.- Once you have selected the desired options, press the START key (H). The washing machine
will start up and one of the time remaining or programme phase lamps (V) will come on. This
lamp indicates approximately how much time is left before the wash programme is completed
(or wash cycle phase): it will change as the programme progresses. Make sure that the stop/end
of cycle lamp is flashing before pressing the start key (H). If it remains on continuously, turn
the programme selector to OFF and re-set it to the desired programme.
To cancel an option after setting, just press the option key again (the indicator lamp will
go out).
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Candy CTA 84 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Candy CTA 84 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info