764872
6
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
11
Part 6 : DRAIN & STORE
Drain System
Locate and remove the external threaded Drain Cap. Attach Drain Hose to Drain Outlet.
Locate and remove the stopper on the spa floor to allow water to drain.
Dry the Spa and Portable Control Unit
After a GFCI test, press the Jet Massage Button to blow out the water inside the jet holes.
Unplug the PCU, remove the filter cartridge from the Filter Housing and dry the PCU by draining
all water from PCU body and pipes. Open the Drain Valve on the bottom of the PCU, let the water
flow out and close the Drain Valve.
Storage
Use a towel to wipe off the spa and dry for 24 hours. Unscrew the Air Valve on both the
spa and the lid. Once the spa and lid has been deflated and the Foam Panels have been
disassembled, gently fold them for storage. It is recommended that you store the spa in its
original package in a warm dry place.
Part 7 PORTABLE CONTROL UNIT FUNCTION
A. Temperature Increase
Button
C. Blower/Jet
massage Button
B. Temperature Decrease
Button
D. Filter Button
E. Heat Button
G. Temperature Mode Button
F. LED Display
Functions of the Spa Portable Control Unit
LED Display: Once powered-up, the LED display will show the current water
temperature automatically.
‘Temperature Adjustment’ Buttons (A & B): Increase (A) Decrease (B). Pressing one
of the temperature adjustment buttons will cause the LED display to flash. When
it is flashing, you can set the desired temperature. The value will increase or decrease
by 1°F/ 1°C for each press. If you hold the button for 2 seconds, the values will
increase/decrease rapidly.
Temperature Adjustment Ranges: 86°F - 104°F/ 30°C - 39°C To lock the Portable
Control Unit, press (A) + (B) at the same time and hold them for 3 seconds. When the
spa is left unattended please be sure to lock the PCU to avoid having
the settings changed. Unlock the PCU by pressing (A) + (B) at same time
and holding for 3 seconds again.
‘Temperature Mode’ Button (G): Press this button to change from Celsius to Fahrenheit.
‘Jet Massage’ Button (C): Press this button to activate the Jet Massage system; when
activated a green indicator light turns on and ‘BUB’ is displayed on the screen. It can be
turned off by pressing it again.
NOTE:
The massage system will stop automatically after 15 minutes of operation. Re-activate
the jet function by pressing the jet button again.
When the filter mode is on, pressing the Jet Massage Button (C) will cause the filter
mode to turn off and the jet massage mode to turn on.
Heating and jet function can not be activated at same time. When heating system
is working, pressing (C) will change heating mode into jet mode: heating and filtering
are shut down, jet system is activated. If you press (C) again, heating and filtering
mode will re-start.
Pressing Filter Button (D) activates the filter system. This button turns the filter pump on
and off. The green indicator light will turn on when the filtration system is activated.
Note: When heating and filter functions are working at same time, pressing (D) will shut
down heating and filtering together. When (C) is on, filter and heating cannot be
activated, therefore (C) should be shut down first.
Pressing the Heat Button (E) activates the heating and filtering system at the same time
The green filter light and red heat light will be activated at the same time. The PCU
does not stop heating until the current water temperature reaches the set
temperature indicated by the ‘blinking’ red light.
When you press the Blower Button (C) the circulation pump and the heater will stop, as
a consequence the temperature on the display will decrease (due to no flow of water
between the PCU and the spa). To regain heating functionality turn the Blower Button (C
off and press the Heat Button (E). The circulation pump will restart and the temperature
will increase or the heating mode will restart automatically after the water temperature
drops 1°F/ 1°C (approx) below the set temperature. Max. heat temperature: 104°F (39°C).
Allow 24-48 hours to heat up your spa.
• This spa is equipped with automatic moisture protection which will activate the blower
of the PCU once a day for 90 seconds. This helps to prevent condensation build up and
increase the lifespan of the PCU.
Heater
Port
Blower Port
Air Valve
Filter Housing
Filter Port
Digital Display Pad
The Portable Control Unit
(PCU)
10
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canadian Spa Company Swift Current bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canadian Spa Company Swift Current in de taal/talen: Engels als bijlage per email.

De handleiding is 7,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Canadian Spa Company Swift Current

Canadian Spa Company Swift Current Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info