31
650BDazur
ENGLISH
5. DNS 1
The IP address of the first (primary) DNS (Domain Name System) server.
DNS is the mechanism to translate human-readable addresses to
numeric IP addresses. When "IP Configuration"is set to "Auto (DHCP)",
the value displayed here is obtained using DHCP and cannot be changed.
6. DNS 2
The IP address of the second (secondary) DNS server. When "IP
Configuration"is set to "Auto (DHCP)", the value displayed here is obtained
using DHCP and cannot be changed.
7. BD-Live Network Access
To restrict BD-Live content access. The available options are:
On – BD-Live access is permitted.
Limited – BD-Live access is permitted only for contents that have a valid
content owner certificate. Internet access is prohibited if the BD-Live
contents do not have a certificate. This option ensures that you are
accessing only authentic content, although it may block your access to
smaller independent content providers.
Off – BD-Live access is prohibited.
8. Connection Test
To test the Internet connection. It is recommended that you test the
connection when you initially connect the player to the Internet, or
whenever changes to "IP Configuration"and other network parameters
are made.
9. MAC Address
This read-only field displays the MAC (Media Access Control) address of
the player. Each player has a unique MAC address. It is used by
networking devices (such as a router or PC) on the same network to
provide identification and facilitate communication.
Picture Adjustment
Picture Adjustment is a special section of the Video Setup menu. It allows
you to fine tune many picture control parameters in order to achieve the
optimal picture quality and visual result. To use Picture Adjustment, press
the SETUP button on the remote control to enter the player’s Setup Menu,
and then choose "Video Setup"– "Picture Adjustment". The Setup Menu
will be replaced by the Picture Adjustment menu:
To change a picture adjustment parameter, use the /buttons to
highlight the parameter, and use the /buttons to change its value.
To aid in the adjustment of picture control parameters, the picture
adjustment menu will be reduced to only show the parameter being
adjusted once you press the /buttons. The reduced menu will be
positioned near the bottom of the screen.
You can continue adjusting the current parameter by pressing the /
buttons. To select another parameter, press the /buttons. Press the
Enter button to return to the large Picture Adjustment menu.
To exit the Picture Adjustment menu and return to the Setup Menu, either
select "Exit"or press the Return button.
The following picture adjustment controls are available:
Brightness – To adjust the brightness (black level) of the video output.
Contrast – To adjust the contrast (white level) of the video output.
Note: Proper brightness and contrast settings are necessary for a quality
video output. If you do not have the correct black and white levels, your
images can appear washed out or can lose detail in shadows when
watching darker scenes. Televisions have brightness (black level)and
contrast (white level) controls; however it may require a combination of
tweaking both the player and your television to get the optimal result.
First adjust the television’s picture controls for the best possible picture.
Once that is done, try changing the player’s settings to further refine the
picture to the optimal result.
Hue – To adjust the hue (tint) of the video output. This control only applies
to analogue video output (component and composite)
Saturation –To adjust the saturation (colour intensity level) of the video
output.
Sharpness – To adjust the sharpness of the video output.
