497532
32
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
32
Setup menu continued
2. Distance
The speaker distance parameters sets delay control for the
corresponding audio channel. This delay is used to compensate for the
audio propagation time difference caused by the placement of speakers
of different distances from the listening position.
Speaker distance delay is only applied if the player is decoding multi-
channel audio. If you use bitstream audio output to your A/V receiver, the
bitstream audio is not adjusted for speaker distance delay.
Since the delay is calculated based on the distance difference from each
speaker to the listener’s position, it is important to set the distance for
the front speakers rst and then the other speakers. Anytime you change
the distance of the front speakers, the distance of the other speakers
will be automatically adjusted to maintain the same distance difference.
For example, in the above diagram, measure the distance (in feet) from
the primary listening position to the Front Left or Front Right Speaker.
Your Front Right and Left speakers must be the same distance from the
listener. Enter the distance of the Front Speakers (1. in the above picture)
into the
"Speaker Conguration" menu.
Next, measure the distance (in feet) from the centre speaker (2) to the
listening position. Move the cursor to highlight the Centre speaker in the
Channel Delay setup page, and enter the distance (as close as possible)
in feet. Repeat for each speaker in the system (Centre, Surround
Left, Surround Right, Surround Back Left, Surround Back Right and
Subwoofer) as available. The player will insert appropriate delay to the
center, subwoofer and surround channels to make sure sound waves
from different speakers arrive at the listener at the same time.
Notes:
The distance between the surround speakers and the listener must
be shorter than or equal to that between the front speakers and the
listener.
The front, surround and surround back speakers are congured as
pairs. Changes to the distance of one speaker will automatically
change the other speaker of the pair.
3. Trim
The speaker trim level parameters sets the volume of each individual
channel. For most accurate results, it is recommended that you use test
tones from a calibration disc, such as Digital Video Essentials HD Basics,
and a SPL (Sound Pressure Level) meter. The trim level can be set to +/-
10dB in 0.5dB increments.
Other Audio Processing Settings
1. Crossover Frequency
When the speaker size is set to "Small" in "Speaker Conguration",
bass frequencies are not passed to the speakers to reduce possible
distortion, bass frequencies will instead be redirected to the subwoofer.
The available options are:
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz
/ 250Hz – These are the available crossover frequencies. You can press
the / buttons and the Enter buttons to select it. This option applies
to all speakers (center, front, surround, and surround back speakers). By
default the crossover frequency is 80Hz.
2. Dynamic Range Control
To set the Dynamic Range Compression (DRC). DRC can smooth out the
sonic peaks and valleys common with wide-range digital audio. Enabling
DRC may make low level audio more audible during low-level listening.
Turning off DRC restores the sonic energy present in the original
recording. The available options are:
Auto Play at the dynamic range specied by the disc. This option
applies to Blu-ray Discs only. For other disc types no dynamic range
compression is applied.
On – Turn on dynamic range compression.
Off – Turn off dynamic range compression.
Note: Dynamic Range Compression is applied to the analog audio output
and digital audio outputs (HDMI, Coaxial and Optical) when the audio
format is set to PCM.
3. DTS Neo:6 Mode
Allows you to enable DTS Neo:6 audio processing and select the
listening mode. DTS Neo:6 is a digital signal processing that can
expand the original stereo source to 7.0 (L, R, C, LS, RS, LR, RR) or 7.1
(with Bass Management) surround.
Music – Enables DTS Neo:6 audio processing for stereo music sources.
Cinema – Enables DTS Neo:6 audio processing for digital TV box or
stereo movie sources.
Off (default) – Turns off the DTS Neo:6 to keep the original audio quality.
4. Output Volume
Allows you to enable or disable the analog volume controls (also known
as Variable Audio). The available options are:
Variable – Enables the analog volume control. Use the Volume buttons
on the remote to decrease/increase the analog audio output level
(the maximum is 100). Both the 7.1 and dedicated stereo outputs are
affected.
Both the 7.1 and dedicated stereo outputs are affected.
Fixed – Disables the analog volume control. The Volume buttons on the
remote will no longer affect the analog audio output, and the volume
level is xed to 100.
FL
FR
C
SW
SL
SR
SB SBR
1
2
3
Distances:
1 - Listener to Front
2 - Listener to Centre
3 - Listener to Surround Left
Speaker Icons:
FL - Front Left
FR - Front Right
C - Centre
SW - Subwoofer
SL - Surround Left
SR - Surround Right
SBL - Surround Back Left
SBR - Surround Back Right
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 752BD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 752BD in de taal/talen: Engels als bijlage per email.

De handleiding is 5,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 752BD

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Nederlands - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Deutsch - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Français - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Italiano - 42 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Espanõl - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Polski - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Svenska - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info