497532
8
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
7. USB port 1 and 2
Port for interfacing to a ash/memory card or Mass Storage Device (such
as a portable hard-drive).
Note:
This unit supports USB Mass Storage Class Bulk Transport devices
only. Most USB thumb drives, portable hard disk drives and card
readers conform to this device class. Other USB devices such as MP3
players, digital cameras, and mobile phones that include their own
memory management may not be compatible.
Supported USB drives must be formatted with the FAT (File Allocation
Table), FAT32 or NTFS (New Technology File System) le system.
In some cases, an incompatible USB device may cause the player to
stop responding. If this occurs simply turn off the power, remove the
USB device, and turn the player back on.
The player accesses the USB drive in read-only mode. In order to
minimize the risk of data corruption, it is recommended that you only
unplug the USB device when playback has completely stopped.
8. IR (Infra-Red) emitter in
Allows modulated IR commands from multi-room systems or IR repeater
systems to be received by the unit.
9. RS232C
Used for control of the 752BD in Custom Install situations. A full protocol
is available for the 752BD on our website.
10. 7.1 channel analogue audio output
If Down-mix is set to "7.1 CH" in the Speaker Setup page (Down-mix mode
section) of the 752BD’s Setup menus, these sockets provide 7.1 output
from the 752BD’s built in Surround-Sound decoder. This can be used to
connect to the 7.1 audio line-level inputs of an amplier/AV receiver or
amplied speaker package if required. Similarly, Down-mix can be set
to "5.1 CH" to provide 5.1 output. If Down-mix is set to "LT/RT", "Stereo"
or "V.Surround" the Left and Right outputs only are active and provide a
stereo or stereo downmixed output. Refer to the "Speaker conguration"
section of this manual for more information.
11. Digital input
Optical and Coaxial digital audio inputs, used to connect to:
Toslink Optical - Use a high quality TOSLINK bre optic cable.
S/P DIF Co-Axial Digital - Use a high quality 75 ohm digital RCA/Phono
interconnect cable designed specically for digital audio use.
12. Stereo audio out
Permanent stereo outputs for use with Stereo material.
13. AC power socket
Once you have made all audio and video connections, plug the IEC type
AC power cable into the rear of the unit and an appropriate mains socket
then switch on. Your 752BD is now ready for use.
8
Rear panel connections
1. Ethernet LAN port
Used for Playback of context from the Internet or Network attached
storage drives and servers, also used for discs supporting BD-Live that
provide interactive features when the player is connected to the Internet.
2. HDMI input
This input is used to connect to a source device such as a set-top box or
other HDMI Source.
3. Diagnostic video
Use for diagnostic purposes. Connect to a TV/Monitor via a 75 ohms
RCA/Phono cable designed specically for video use.
4. Digital outputs
Optical and Coaxial digital audio outputs, optionally used to connect to
a suitable Audio/Video Receiver for surround sound decoding (output
must be set for "Bitstream" - refer to the "Audio setup" section). HDMI is
however the preferred correction to AV Receivers as the latest lossless
CODECS are only supported over HDMI. These outputs can also be used
to connect to a separate DAC or digital recording device (output must be
set for "LPCM" - refer to the "Audio setup" section).
Toslink Optical - Use a high quality TOSLINK bre optic cable.
S/P DIF Co-Axial Digital - Use a high quality 75 ohm digital RCA/Phono
interconnect cable designed specically for digital audio use.
5. HDMI output 2
Secondary HDMI output. Both outputs 1 and 2 can be used at the same
time to send the same audio/video to two displays (with both being 3D
TV compatible) or to send audio over one HDMI link and video over the
other.
Always use a "HDMI 1.4 High Speed" certied Cable.
HDMI 1 and 2 both support Audio Return Channel from TVs that have this
function. See later section.
6. HDMI output 1 (primary output)
The HDMI (High-Denition Multi-Media Interface) is a purely digital
connection that can carry both audio and video. Use a dedicated HDMI
cable to connect to a TV/Monitor or AV Receiver with a compatible HDMI
input.
Always use a "HDMI 1.4 High Speed" certied Cable.
This output is the primary output and benets from the Marvell QDEO
video processor. Both this output and output 2 are 3D TV compatible.
HDMI 1 and 2 both support Audio Return Channel from TVs that have this
function. See later section.
1
2
76
5
4
12
3
8 9
10
11
13
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 752BD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 752BD in de taal/talen: Engels als bijlage per email.

De handleiding is 5,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 752BD

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Nederlands - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Deutsch - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Français - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Italiano - 42 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Espanõl - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Polski - 40 pagina's

Cambridge Audio Azur 752BD Gebruiksaanwijzing - Svenska - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info