656755
34
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
34
With this conguration you can now control Zone 2 from the main room by
using the main or Zone 2 handsets as supplied (see later section).
If it is desired to remotely control Zone 2 and the sources in it from Zone 2
itself an additional (not supplied) IR repeater system should be used, choose
one with an Emitter (modulated) type output suitable to connect to the Zone
2 IR emitter In (contact your dealer for details).
Zone 2
CD Player
Satellite Receiver
Remote
IR Receiver
IR
Repeater
In this conguration an Infra-Red repeater system receives commands in
Zone 2 and relays them back to the 751R V2 via the Zone 2 IR Emitter In.
Now you can control Zone 2 from within that Zone using either the Zone
2 or main handsets. In addition if IR Emitters outputs are connected from
the Zone 2 IR Emitter Outputs on the 751R V2 to the source components
(usually placed over the source units IR sensors) then commands from
remotes in Zone 2 can be relayed back to the source components.
The sources own handsets plus the Zone 2 or main handsets can be used in
Zone 2 or a learning type remote can be used to combine all the functions
together.
Using Zone 2 with an external stereo power amp.
The 751R V2 Zone 2 outputs include a permanently available preamp
output. This can be used to connect a separate power amp in Zone 2 if for
instance the SBL/SBR amplier channels are being used in the main zone.
Zone 2
Optional
subwoofer
Optionally a Subwoofer can also be used in Zone 2 as shown, simply connect
a suitably long RCA/Phono RCA/Phono lead from the Zone 2 Sub out to
the subwoofer in Zone 2.
The Zone 2 preamp output is unaffected by the assignment of the SBL/R
channels and is always available.
If a power amp is used for Zone 2 the SBL/SBR amplier channels can then
be used for 7.1 (Set decode mode to 7.1) or Height channels (set decode
mode to 5.1+H) or to bi-amp the front channels (Set decode mode to 5.1 and
Set SBL/R assign to Bi-amp) or simply leave them unconnected (Set decode
mode to 5.1 and Set SBL/R assign to None).
If the remote Zone 2 power amp features a trigger input to turn it on and off
it is possible to use one of the 751R V2 trigger outputs for this. Connect a
suitably long 3.5mm mono jack 3.5mm mono jack lead from the Trigger A or
Trigger B output as shown.
Zone 2
To set the Trigger output to follow Zone 2 select Advanced Setup in the OSD
then Trigger A (or B).
Now select Follow Standby and select Zone 2. The trigger output will now be
active (high) when Zone 2 is On and inactive (low) when Zone 2 is Off.
Note: The Trigger menu also allows for Manual Select (i.e. the trigger toggles
each time the Trigger A (or B) button is pressed on the main remote handset.
If you want to disable this function and have the trigger only follow the Zone
2 on/off status ensure that Manual Select is set to No. See the Trigger menu
section for full details.
Controlling Zone 2 from the main room
Controlling Zone 2 Components
From the main room you can use the main remote handset or the buttons on
the front of the unit itself and operation is the same in either case.
First press the Zone 2 button on the front panel or remote then another
button for a function you wish to affect Zone 2 within 5 seconds.
If a command is not received within 5 seconds the unit will return to normal
operation.
To turn on Zone 2 press the Zone 2 button followed by the Standby/On
button within 5 seconds.
Or
When Zone 2 is pressed the display will initially show Zone 2 : Off once
Standby/Off is pressed the display will change to show Zone 2 : BD/DVD or
whatever was the last source used in Zone 2.
12
1
2
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 751R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 751R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 751R V2

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Nederlands - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Deutsch - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Français - 8 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Italiano - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Espanõl - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Polski - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info