656755
29
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
751R V2azur
29
ENGLISH
The 751R V2 supports an Audio Return Channel (ARC) function from TVs that
also support this function (which must feature an HDMI1.4 input and have
actually implemented the ARC feature, see your TVs manual).
ARC allows a TV to send audio back down its incoming HDMI lead to the
751R V2's HDMI A output socket.
This function allows the 751R V2 to play back the audio from a TVs built-in
terrestrial cable or satellite tuner whilst you watch it's picture.
Using ARC
The ARC must rst be enabled in the Advanced Audio Setup menu.
Advanced Audio Setup
Multi Ch.Out :
HDMI Bypass :
TV ARC(HDMIA) :
Auto Power Down :
Pre Out
Normal
Enable
Enable
Return I/O
ARC can be started in one of two ways. If your TV supports it there may be a
menu item to start ARC on your TV.
Your TV then sends commands to the 751R V2 which cause it to start an ARC
session and 'TV-ARC' will appear on the front panel display automatically.
Some TVs may also start an ARC session whenever you select the in-built
tuner and stop when you select another source.
Alternatively you can start ARC by pressing the Aux/TV button twice on the
751R V2 (as long as TV-ARC has been enabled in the 751R V2's OSD which
is the default setting).
The rst press selects Aux, the second selects ARC and 'TV-ARC' appears on
the front panel display. The 751R V2 will then send commands to the TV over
HDMI to try to start an ARC session.
To nish ARC simply disengage it on your TV or press a different source
button on the 751R V2.
Picture adjustment
For sources that have had the Scaler set to Process the 751R V2 can provide
some picture adjustments.
These adjustments are remembered source by source.
Pressing a source for which the scaler is in Bypass will do nothing.
Pressing a source for which the scaler is set to Process will bring up the rst
adjustment item, shown at the bottom of the screen as below:
Contrast: +41
1. Press the Tuner FM/AM button on the front panel or remote control to
select Tuner mode.
2. Press the Tuner FM/AM button again to select FM or AM if desired.
3. Press the Mode/Store button on the front panel (or Mode button on the
remote control) to select automatic tuning, manual tuning or preset mode.
4. Press the Tuning + and Tuning - buttons (or the left and right arrow buttons
on the remote) to select the station you want to listen to.
In automatic tuning mode the unit scans to the next strong station. In manual
tuning mode the user can step manually through the frequencies. In preset
mode the unit cycles through the presets only.
Two FM modes are available, stereo and mono - Press the Stereo Mono
button on the remote to alternate between Stereo mode and Mono mode. If
the Display button is pressed, the RDS station names of FM stations will be
displayed if available.
Storing stations
1. Tune in a station you wish to store as explained previously.
2. Press and hold the Mode/Store button (or use the Store button on the
remote) for 5 seconds.
3. Use the Tuning +/- buttons to select a preset station number (1-15). The
station number will be displayed on the screen.
4. Press the Mode/Store button (or use the Store button on the remote) to
memorise the frequency.
Radio Data Systems (RDS)
RDS is a method for the transmission of additional information from local
radio stations. It is only available in FM mode. RDS will only work if the
local broadcasting stations have RDS transmission and the signal is strong
enough.
Press the Info button on the remote and go through the displayed functions.
There are functions for PS, PTY, CT and RT:
PS (Station Name)current station name will be shown
PTY (Program Type)current name type of the program will be shown
CT (Clock/Time) – current time from Radio Station will be displayed.
Note: Clock/Time will be only transmitted from local radio station once a
minute. If the Clock - Time is not available the message "NO CT" will appear
briey on the display.
RT (Radiotext) – Radiotext messages will be shown, if available.
Lip sync
The 751R V2 can if required apply a small delay to the audio playback to
resynchronise it to any video playback which appears to be behind the audio
in time.
This can sometimes happen if the video is slightly delayed by a player or TV
performing a lot of video processing.
Pressing the Lip Sync button on the remote will bring up the
current Lip Sync value on the 751R V2's main display and allow
adjustments in 10mS (10 thousandths of a second) increments.
Setting the Lip sync value to 0 causes Lip Sync delay to be turned off.
Note: The Lip sync value is stored and recalled separately for each source.
Using the tuner Audio Return Channel
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 751R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 751R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 751R V2

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Nederlands - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Deutsch - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Français - 8 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Italiano - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Espanõl - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Polski - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info