656755
8
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
8
Volume
Increase or decrease the volume of the AV receiver output.
Also used as up/down in the OSD setup menus.
Enter
Used in the OSD setup menus.
Tune / Left & Right
Press the right arrow to increase tuner frequency/change
preset. Press the left arrow to decrease tuner frequency/
change preset. Also used to scroll left/right in the OSD
setup menus.
Mute
Mutes the audio on the AV Receiver. Press again to cancel
mute.
Picture adjustment
Press to select various picture adjustments for sources
that have the Scaler set to Process only.
An adjustment bar will appear on the TV for the current
item (Brightness, Contracts etc.) Press the Pic. Adj. button
again to move to the next item. Use the volume buttons to
make the adjustments.
Pressing and holding Pic. Adj. when the OSD is active
switches the active HDMI output. See later 'HDMI A and
B outputs' section.
Lip sync
Press to activate and adjust the lip sync delay function if
the audio and video appear out of sync. While the Lip sync
delay status is shown on the units display, use the Vol
and Vol
buttons to adjust the delay time. Adjusting the
value to zero causes lip sync delay to be turned off. See
later section in this manual.
Info
Press to view the current source material and decoding
mode. Press again whilst the current decoding mode
is scrolling (as long as mute is not on) to display the
incoming sample rate. When listening to FM with RDS,
press to cycle round various RDS information modes.
Dim
Adjust the backlight of the front panel display; off, dim,
bright or very bright.
Tuner AM/FM, BD/DVD, Video 1, Video 2,
Rec 1, Aux/TV, CD, Rec 2, Vid 3/MP3, USB,
Exp.
Press the corresponding button to change the input
source. Pressing the Tuner AM/FM button a second time
toggles between AM and FM modes.
Pressing the Aux/TV button a second time if ARC is enable
(see later section) selects TV-ARC (Audio Return Channel).
Note: Expansion (Exp) button is only used with older AV
receiver.
The above button descriptions are naturally brief. Please
refer to the 'Operating Instructions' section of this
manual for more information on the relevant functions
implemented.
7.1 direct
Selects the 5.1/7.1 direct input.
& Trigger A/B
Toggle On and Off the Trigger outputs. See trigger section
for details and setup.
Main remote control
The 751R V2 is supplied with an Azur Navigator remote
control. Insert the supplied AAA batteries to use. For full
details of the various adjustment functions available from
the remote, refer to the later sections of this manual.
This remote can be used in the Main Zone or Zone 2 (via
an IR repeater system) and will automatically affect only
the Zone in which it is used.
Backlight button
Press to turn the backlight on and illuminate the remote
control buttons. Press and hold for a few seconds (all
buttons will initiate a rapid ashing) to enable backlight
function by pressing any buttons on the remote. Press and
hold again to disable function and revert to default.
Standby/On
Switches the unit between Standby mode and On.
HDMI preview
Press to see the previews of different HDMI sources
connected to the unit. Use Vol
and Vol buttons to
navigate. See later section of the manual.
Analogue direct
Directly selects a stereo analogue input for the current
source with no A/D or D/A conversion or DSP processing.
Stereo modes
Selects Stereo or Stereo + Sub modes for Analogue or
Digital sources (digitally processed).
Surround modes
Selects digital surround processing modes and various
matrix encoded surround processing modes for analogue
or digital sources (digitally processed).
Stereo/Mono
When listening to FM, press to alternate between stereo
and mono modes.
Store
Press to store the current frequency as a preset when in
Tuner mode.
Mode
Press to select Auto/Manual or Preset tuning when in
Tuner mode.
Audio in type
Switches the audio between the types available for the
current source. Depending on the source selected and
whether you have assigned an HDMI input to it, Analogue,
Digital and HDMI can be available.
Bass/Treble
Press for bass/treble adjustment, using the Volume up/
down buttons. Note: Bass/Treble is bypassed in analogue
stereo direct and 7.1 direct modes.
Zone 2
Selects Zone 2 and displays its status on the display.
The next source change, Standby/On or volume control
commands will affect Zone 2 instead of the Main Zone.
See Zone 2 section for details.
On-screen display (OSD)
Press to turn on and off the on-screen setup menus for
display on your monitor/screen.
Source button
Press to cycle through different sources.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 751R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 751R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 751R V2

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Nederlands - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Deutsch - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Français - 8 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Italiano - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Espanõl - 40 pagina's

Cambridge Audio Azur 751R V2 Gebruiksaanwijzing - Polski - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info