656752
23
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
551R V2azur
23
ENGLISH
ENGLISH
Bi-amping
If you a running a 5.1 (or less) speaker setup only the 551R V2 allows for
bi-amping of the front left and right channels. It will be seen in the Speaker
Conguration menu that with the Decode mode set as 5.1 a Bi-amp On/Off
item appears.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Decode Mode
Front L/R
Center
Surr. L/R
Subwoofer
Biamp
Back: [I/O]
5.1 < >
Large < >
Small < >
Small < >
Yes < >
No < >
When selected, the 551R V2 sends the front left and right signals to the SBL
and SBR outputs as well.
In conjunction with bi-wireable/bi-ampable speakers this allows you to
use two runs of speaker cable to each speaker with a dedicated amplier
channel for the bass and treble drivers of each speaker which can slightly
increase the sound quality.
See diagram below of a bi-amped system (only front left and right speakers
shown).
Note: Bi-wire links must be removed on the speaker's terminals.
Front
Right
Front
Left
Surround
Left
Surround
Back Left/
Surround Back
Centre
Surround
Right
Surround
Back Right
Speaker Impedance 4-8 Ohms
7.1 6.1 5.1
Front
Right
Front
Left
Speaker Impedance 4-8 Ohms
5.1
Surround
Left
Surround
Right
Tone/Sub conguration
Select the 'Tone/Sub Cong' menu:
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Bass
Treble
LFE Trim
DD/DTS Sub Trim
DD/DTS Bass Aug
PLIIx Sub Trim
PLIIx Bass Aug
Stereo+Sub Trim
Back: [I/O]
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
The Bass response can be adjusted +/- 10dB @ 100Hz (shelving). The Treble
response can be adjusted +/-10dB @ 10kHz (shelving). The "Tone" icon will
light up on the display if these controls are adjusted away from 0dB (at). The
Subwoofer crossover point can also be adjusted from 40 to 150Hz in 10Hz
steps and also to 200Hz.
The 551R V2 incorporates a couple of advanced Bass Management features.
The overall Sub Level for DD/DTS modes, Dolby Pro Logic II/x/Neo:6 modes
and Stereo + Sub mode can be set to different levels. This can be useful if
you prefer to have a high level of Sub operation whilst watching movies but a
lower level for music playback. The three levels are simply adjusted by up to
+/-10dB in the OSD. The second feature is that the way Bass Management
is applied can be changed.
In normal operation (Bass Augment Off) if the Front speakers are set to
'Small' (in the 'Speaker Cong' menu) their bass is re-directed by high-pass
ltering the Fronts and sending that bass to the Sub channel (i.e. bass is
removed from the Fronts and sent to the Sub). If they are set to 'Large' no
ltering takes place and no bass is sent from them to the Sub channel.
However with the Bass Augment function On and the Front speakers set to
'Large', bass from the Front Left and Right is now sent to the Sub channel
without any ltering of the Front Left and Right taking place (i.e. these
channels remain full range). In other words, the bass in the Sub channel is
augmented by extra bass from the Front Left and Right channels. If the Front
Left and Right are set 'Small', Bass Augment has no effect and operation is
the same as for Bass Augment Off.
Bass Augment can be On or Off separately for DD/DTS or Dolby Pro Logic II/
IIx/Neo:6 operation.
There is no Bass Augment function for Stereo + Sub mode because in this
mode if the Front speakers are set to 'Large' they will actually always be
unltered.
Bass Augment can be a useful function with Dolby Pro Logic II/IIx and Neo:6
material because these encoding types do not include an LFE Channel. This
would normally mean that if all the speakers in your setup were set to 'Large',
the subwoofer would in fact be inactive (as no bass has been re-directed
plus there is no LFE channel). If it is desired to have the subwoofer running
with all Large Speakers and these encoding types, enable Bass Augment for
Dolby Pro Logic II/Neo6 and then set the Crossover points and levels by ear.
A Sub channel will now be created from the Front Left and Right channels
without ltering them. As with all adjustments it is a good idea to experiment
to determine what works best with your particular setup.
Note: These adjustments work in all digitally processed Stereo or Surround
modes but not in Analogue Stereo Direct or 7.1 Direct modes.
The LFE channel (for DD / DTS material) can also be trimmed by up to 10dB
in 1dB steps useful for late night listening or other situations where it might
be desired to reduce the low frequency effect level perhaps temporarily.
Remember the LFE is the Low Frequency Effects channel encoded into
the disc and is different to the over all sub level which can include bass
management from the other speakers.
Bass/Treble adjustments can also be made from the remote without
entering the OSD by pressing the Bass/Treble button and then using the
Vol Up/Down buttons.
Sub trim adjustments can also be made from the remote without the OSD
by holding down the Sub On/Off button and using the Vol Up/Down buttons
whilst it is kept down.
OSD setup
On-Screen Display is available on all video outputs.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Language
OSD Format
Software Version
Back: [I/O]
English < >
576P < >
x.xx < >
The OSD can be shown in several different languages. To change the OSD
language highlight the 'Language' menu and use the Left and Right arrows to
select between English, Dutch, French, German, Spanish, Italian, Norwegian,
Swedish and Danish. Press the OSD button again to exit and save the
options.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 551R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 551R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 551R V2

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Nederlands - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Deutsch - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Français - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Italiano - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Espanõl - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Polski - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info