536914
5
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
RCD 272DBTi MANUAL
6
Radio Data System
This unit has a built-in Radio Data System
decoder system that supports broadcast stations
transmitting “Radio Data System” data.
When using the “Radio Data System” function,
always set the radio to FM mode.
AF function
The AF function switches to a dierent frequency
on the same network in order to maintain
optimum reception.
* The factory default setting is ON.
1. Set to system setup by long pressing [ DISP ]
button.
2. Press the [
] or [ ] button to select “ AF ”.
3. Rotate the [ V OLU ME ] knob to select ON or
OFF.
AF ON:
AF indicator appears in the display and AF
function turns on.
AF OFF:
AF indicator disappears in the display and AF
function turns o.
REG (Regional programme) function
When the REG function is ON, the radio will
automatically tune into the station with the
the AF control. If this function is OFF and the
regional area changes as you drive, the radio will
tune into a station within the current region.
* The factory default setting is ON.
RADIO DATA SYSTEM OPERATIONS
Notes:
This function is disabled when a national
station such as BBC R2 is being received.
The REG function ON/OFF setting is valid
when the AF function is ON.
1. Set to system setup by long pressing [ DISP ]
button.
2. Press the [
] or [ ] button to select
REG ”.
3. Rotate the [ VOLU ME ] knob to select ON or
OFF.
Manually tuning a regional station in the
same network
This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
In the TA standby mode, when a trac
announcement broadcast starts, the trac
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Trac programme (TP)
automatic tuning is also available.
* This function can only be used when TP
appears in the display. When TP appears,
this means that the Radio Data System
broadcast station being received has trac
announcement programmes.
Setting the TA standby mode
If you press the [TA] button, TA lights in the
display and the unit is set into the TA standby
TRAF INF ” appears in the display. If you press
the [TA] button while a trac announcement
broadca st is being rec eived, the trac
announcement broadcast reception is cancelled
and the unit goes into the TA standby mode.
Cancelling the TA standby mode
As TA lights in the display, press the [TA]
button. The TA in the display goes o and the
TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
* S ome countries do not ye t have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press [ MENU / ] button, then rotate the
[V OLU ME ] knob to select PTY type, press the
[VOLU ME ] knob, the unit begin searching.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Caliber RCD272DBTI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Caliber RCD272DBTI in de taal/talen: Engels als bijlage per email.

De handleiding is 5,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Caliber RCD272DBTI

Caliber RCD272DBTI Snelstart handleiding - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Polski, Svenska - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info