699227
4
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
CAM 030
English
Installing the CAM030
Look for a location that will give you the best view behind the vehicle. This should not be directly next to or under a reverse/
backup lamp as it may blind the camera at night. Avoid license plate lamps as well as they too can blind the camera at night.
Determine which casing option (A/B/C) is most suitable for your vehicle.
Wire the camera’s power wire to the vehicle’s reverse lamp:
a) Locate the reverse lamp in the tail light assembly
b) Using a crimp connector or by soldering attach the red wire to the positive 12 volt wire from the reverse lamp. This should
only have power when the car is in reverse gear and the white lamp illuminated. Attach the black wire to the Ground
(Negative 12 Volts only).
Run the extension cable to the location of the monitor/head-unit (not included) and connect the other end of the extension
cable to the camera. Yellow RCA connected to the Video/CAM input.
Blue wire:
Cut to turn off the guiding lines*
White wire:
Cut to horizontally mirror the image on screen*
*Turn the camera OFF and ON again for the cut to take effect
Head-unit
On some head-units you need to connect the 12V red wire to the ‘back cam’ wire on your head-unit. The screen will
automatically turn ON when reversing.
Warnings
The product is intended to assist in safe driving and to allow
the driver to have a broader rear view while the vehicle is in
reverse. You, as the driver, are solely responsible for the safe
operation of your vehicle and the safety of your passengers
according to local trafc regulations. Do not use any features
of this system to the extent that it distracts you from safe
driving. Your rst priority while driving should always be the safe
operation of your vehicle. Caliber Europe BV cannot accept any
responsibility whatsoever for accidents resulting from failure to
observe these precautions or safety instructions
1. This product utilizes high voltage. Any unauthorized
modications or damage to the product may result in
electrical shock. Handle all components with care. Inspect
regularly for damage to components and cabling.
2. You are responsible for ensuring that the installation of this
product does not void or affect the vehicle manufacturer’s
warranty. Caliber Europe or its subsidiaries are not liable
in full or in part for improper installation resulting in loss
or damage to your property, or for voiding all or part of the
vehicle manufacturer’s warranty.
3. Do not apply excessive force to any of the components
contained within this kit. Excessive force used before,
during or after installation that results in a damaged or non-
functional part will void all warranties.
4. Please follow the procedures in this installation manual.
Improper installation or modication of this product will void
all warranties.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Caliber CAM 030 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Caliber CAM 030 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans, Zweeds als bijlage per email.

De handleiding is 4,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info