694412
82
Verklein
Vergroot
Pagina terug
1/352
Pagina verder
82
VENUS - GIOIA
EN
11.2 ”BLACK OUT” ALARM
“ACTIVE ALARM” “AL 1 - BLACK OUT”: current breaking during ignition.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and then is in “OFF”:
Clean the burning pot and start the stove up again with P4 key.
11.3 ”EXHAUST PROBE” ALARM
To the exhaust is connected a probe which contantly controls the temperature during working time.
“ACTIVE ALARM” “AL 2 - EXHAUST PROBE”: the probe is damaged or disconnected.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and the is in “OFF”.
Check the type of glitch as ALARMS page 90.
Clean the burning pot and start the stove up again with P4 key.
11.4 ”HOT EXHAUST” ALARM
If the fume probe registers a temperature at the exhaust higher then 180°C, the display shows “HOT
EXHAUST”. Then the combustible (pellet) drop will be decreased at phase 1.
This function has the aim to bring the values within preset values. If for any reason the temperature would
not decreas but increase, at 215°C the display shows “ACTIVE ALARM” “AL 3 - HOT EXHAUST” and the stove
start the switching off phase up.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and the is in “OFF”.
Check the type of glitch as ALARMS page 90.
Clean the burning pot and start the stove up again with P4 key.
11.5 ”FAN FAILURE” ALARM
“ACTIVE ALARM” “AL 4 - FAN FAILURE”: the fume fan is out of order.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and the is in “OFF”.
Check the type of glitch as ALARMS page 90.
Clean the burning pot and start the stove up again with P4 key.
11.6 ”NO IGNITION” ALARM
“ACTIVE ALARM” “AL 5 - NO IGNITION”: the temperatureis not sufcient for ignition.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and the is in “OFF”.
Check the type of glitch as ALARMS page 90.
Clean the burning pot and start the stove up again with P4 key.
11.7 ”NO PELLET” ALARM
If the fume probe registers a temperature at the exhaust lower than the minimum threshold and the display
shows “ACTIVE ALARM” “AL 6 - NO PELLET”.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and the is in “OFF”.
Full the hopper.
Clean the burning pot and start the stove up again with P4 key.
11.8 ”THERMAL SAFETY” ALARM
In the hopper is installed a thermostat with manual reset which activates if the temperature excursion
exceeds the allowed limits, so avoiding the possibility that the pellet inside the hopper could burn because
of overheating.
“ACTIVE ALARM” “AL 7 - THERMAL SAFETY”: the thermostat stops the power supply to the auger.
Reset the error with P4 key. The stove carries out the phase “FINAL CLEANING” and then is in “OFF”.
Check the type of glitch as ALARMS page 90.
Unscrew the black cap, press the button and screw the cap again.
Clean the burning pot and start the stove up again with P4 key.
82

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cadel Gioia bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cadel Gioia in de taal/talen: Nederlands, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 8,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info