481954
23
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
23
USING YOUR ONIX350 GPS RECEIVER : Name & Icon Editing
You will see the SafeTrack screen (Fig. 43), with a count down delay (time can
be adjusted in the Set Page Menu) before the unit enters SafeTrack mode. If you
accidentally hold the HOT button down, select “Cancel” and press OK. If you
do not cancel, at the end of the countdown, the unit will be in SafeTrack mode.
e display will black out. e ONIX will automatically make GPS satellite
contact every 5 minutes (default, can be changed in SafeTrack Options menu),
which extends battery life significantly while still allowing you to instantly get a
fix on your location and resume navigation when you exit SafeTrack mode.
As long as you are actively using the GPS and pressing buttons (within time
limit set in SafeTrack options (Fig. 44), the screen display will stay active-but
the unit is still in SafeTrack mode.
After a period of inactivity (length of time selectable in SafeTrack options menu),
the Start SafeTrack screen (Fig. 43) will appear.
If you do not want to return to SafeTrack, press OK or LEFT with “Cancel”
selected.
How to Create/Edit Names for Waypoints, Trails, Map Areas, etc.
(Using the Type Tool)
With “Edit Name selected, click OK to bring up the Type Tool, a “virtual
keyboard(Fig. 45). is is a multi-function tool that is controlled by the 5-way
button. Your currently selected character is highlighted. Move LEFT/RIGHT
or UP/DOWN to select letters, then press OK to enter your selected character-
you’ll see it appear in the name near the top of the display. Use the LEFT/
RIGHT keys to move around in a row (it wraps around” when you go past
the 1st or last character in a row), and use UP/DOWN to move through the
columns. e Text Tool automatically switches to lower case after starting a
word with upper case, but you may use “SHIFT”(select, press OK) to change it
anytime. Use “back” to backspace if you make a mistake, or to delete the default
“WPT 000” assigned to a new waypoint before starting to “typeyour preferred
name for it. To switch from letter characters to numbers or symbols, press the
“+” or “-“ buttons (you will see the tabs at the top of the Text Tool change).
Once you are finished creating or editing the name for your waypoint, trail, etc,
be sure to select done” and press OK to actually confirm and enter the name in
the memory of the ONIX350.
How to Set or Edit Icons
With “Edit Icon” selected, click OK and the display will show a menu of icons
(Fig. 46), or common symbols, that you may choose to represent your waypoint
on the map. If you have previously set up a user profile for a particular type
of activity (for example, camping), the group of icons that appears in the icon
selection menu will be the ones most relevant to that activity. Simply use the
LEFT/RIGHT and UP/DOWN keys to move around the available icons, press
OK to select one (you will see it appear next to the name at the top of the
display), then select “done” and press OK again to confirm and enter the icon,
so it appears on the map along with the name.
Fig 43.
SafeTrack
Screen
Fig 44.
SafeTrack
Options
(select “Options”
from SafeTrack
Screen)
Fig 46.
Waypoint
“Edit Icon”
Fig 45.
Type Tool-
Editing a
Waypoint Name
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bushnell Onix 350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bushnell Onix 350 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info