607774
34
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
3534
Operation instructions
Switch-on:
Establishinga Bluetooth connection (pairing):
If the power supply of the hands-free car kit (HFCK) is connected properly, the HFCK is
activated after having started the ignition. The display is switched on and a short high sound is
audible. After the initialisation mask, the main menu is displayed and another deep sound
appears if no mobile phone has been connected automatically to the HFCK via Bluetooth. In
case of a successfully established connection, a long high sound appears.
If you wish to establish a Bluetooth connection for the first time, you have to activate the
Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search
for a device labelled "CC 9050…“. If several devices were identified, please select the HFCK
and enter the PIN number 1234. The Bluetooth connection (pairing) will then be established
between your mobile phone and the HFCK. The HFCK supports the profiles "hands-free
operation" and "A2DP". Please set your mobile phone accordingly or check whether these
profiles are supported.
If it is not possible to establish a connection, please check and update the software release
(firmware) of your mobile phone or of the HFCK. You will find an overview dealing with this
subject on the Internet at www.bury.com. In addition it is possible that you must delete all
devices connected to your mobile phone first in order to enable a correct identification of the
HFCK and a connection can be established. If you have queries regarding the menu navigation,
functions and operation of your mobile phone, please refer to the operating guidelines of your
mobile phone. Depending on the manufacturer and type, this can differ considerably between
phones.
The HFCK has a memory for the storage of the identification of up to 10 mobile phones. In case
an eleventh mobile phone is connected, the oldest entry in the HFCK memory will be cancelled.
After the commissioning of the HFCK it automatically tries - "hands-free operation" profile - to
connect with a mobile telephone already saved.
12 3546
Disconnect a Bluetooth connection:
Menu navigation:
If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the
HFCK or at your mobile phone. In addition, the connection is disconnected, if you move too far
away from the vehicle while taking your mobile phone with you and thus leave the reception
radius of the HFCK.
Please note that the capacity of your mobile phone's storage battery can quickly decrease
when the Bluetooth function is active. If you do not want to use the Bluetooth function anymore,
e.g. if you leave the vehicle for a longer period, it is recommended to deactivate this function.
Please note that some of the functions/displays specified subsequently are only possible if they
are supported by the mobile phone!
The main menu is displayed after having switched on the HFCK. It informs you whether or not
your mobile telephone is connected via Bluetooth. Depending on the connection state, you can
call the main menu here by pressing key 5. The entry, marked with a bar can be selected by
again pressing key 5. The menu navigation can be interrupted with key 4.
- Language
-- English / German / Spanish (selection of the menu language)
- Service
-- Update (performing firmware updates of the hands-free car kit)
-- Colour
--- Primary colour (selection of the background colour)
---Text (selection of the text colour)
-- Software (reference to the current firmware version of the HFCK)
To install a firmware update you need a PC equipped with a Bluetooth interface (most suitably a
laptop). You can find up-to-date firmware versions and installation software for this HFCK on
the internet at www.bury.com
Functions while Bluetooth connection is inactive:
If no mobile telephone is connected, the notice 'disconnected' appears on the display.
(4) = Establishment of a connection with the mobile telephone connected last
(5) =Activation of the menu / calling up a menu item
(6) = Scrolling between the menu items
Other keys = no function
Functions while Bluetooth connection is active:
If a mobile telephone is connected to the HFCK, its BT identification name is displayed. The field
strength equally appears (the reception) as well as the capacity of the storage battery and the
volume level of the HFCK.
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bury CC 9051 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bury CC 9051 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bury CC 9051

Bury CC 9051 Gebruiksaanwijzing - Nederlands - 43 pagina's

Bury CC 9051 Aanvulling / aanpassing - Deutsch - 1 pagina's

Bury CC 9051 Gebruiksaanwijzing - Deutsch, English, Français - 43 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info