Converting from Strolling to Trailering
Remove retaining pin from tow bar, slide bar forward and line up
rear hole with rear receptacle hole. Insert pin through both holes
and fasten safety pin securely. Loosen knob and swing wheel up
into “BIKE” position. Tighten knob. Figure 2
Now attach trailer to bike, using Burley hitch.
Hitching Trailer to Bicycle
1. Remove quick release lever assembly from bike.
2. Line up hole on flat side of hitch upper arm with left
(non-chain ring side) rear dropout hole.
3. Reassemble quick release assembly through hitch and
dropout loosely. Figure 3
4. Slide hitch receiver end of tow bar between hitch side arms,
and line up holes. Racks, bags, or fittings should not interfere
with hitch; if there is interference, contact Burley.
5. Open retaining pin and insert through holes. Rotate pin’s
spring clip and close.
6. Tighten and close quick release lever, with lever pointing to
rear of bike.
7. Wrap safety strap twice around inside of chain stay and then
over hitch body. Fasten hook to D-ring on tow bar
end.
Figure 4
Hook fastened to
D-ring on tow bar