622538
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
TRSE 10
English | 2
Structure
Figure
Clear button
Quitting the programming mode
On / Enter button
Readiness for opening
LED goes on when a valid opening code is entered and programming
is successful.
Battery replacement symbol
When this LED is on, please replace all 3 batteries
(LR6 / AA / 1.5V / Alkaline).
Readiness for entry / programming
The LED goes on when the programming mode is entered. It goes o when
the programming mode is exited again.
Rejected entry / blocking time
The LED goes on when an invalid code is entered or when the programming
is incorrect. In case a wrong code is entered three times in a row, the lock is
blocked for 5 minutes. During this time, the LED ashes. In this status, opening
is not possible, even with a correct opening code.
Dear customer,
Thank you for deciding for a safe with the BURG-WÄCHTER TRSE10 electronics.
This electronics is certied according to VdS class 1 and opening is possible both
with ngerprint and using a Pincode. You have thus acquired a product meeting
extremely high security requirements and developed and manufactured using the
latest technical potential.
Important: Please read the entire User Manual before programming
and store this User Manual at a safe place for future reference at any time
you may need it.
We hope you will enjoy your BURG-WÄCHTER safe.
Your BURG-WÄCHTER KG
Important remarks
In order to enhance the protection against intrusion, the following points
should be observed:
No personal data (e. g. dates of birth) or other data, for which a link can be
derived from the code owner, should be used for coding.
If the code is stored in writing, such document should be consistently stored
safely, so that it is accessible only to the authorized persons.
Attention: Any changes of the Pincode shall be made with the safe
door opened!
When the locking system has been reset to another code, this new code should
be repeatedly used with the safe door opened.
Generally
A Pincode and 10 memory slots for ngerprints are available for opening.
Pincode: 123456 (factory setting)
The Pincode has always 6 digits.
For ngerprint opening, two dierent ngers need to be used, which have to be
dragged over the sensor successively.
When an action has been successfully completed, the green LED goes on.
Technical data
Number of Pincodes 1
Number of
ngerprints
10
Blocking times When a wrong code is entered 3 times, 5 minutes,
subsequently 10 minutes after each wrong entry
Power supply 3 x MIGNON LR6 / AA / ALKALINE
Permissible ambient
conditions
- 15 °C through +50 °C
Up to 95 % rel. air humidity (non condensing)
Menu structure
The individual labels on the keypad indicate numerals and letters. Combinations
of numerals and / or letters are used to program the individual functions. The initial
letters of a programming procedure are composed as a combination of numbers
(to facilitate their remembering). When using these explicit combinations,
the individual submenus are opened.
Opening with Pincode
Press „On / Enter, the yellow LED of the Readiness for entry / programming
icon goes on.
Enter the Pincode. The green LED goes on when entered correctly, the red one
when the entry is rejected.
Turn the rotary handle clockwise to open the door.
Opening with nger
Press „On / Enter, the yellow LED of the Readiness for entry / programming
icon goes on.
Move your 1st nger over the sensor.
The yellow LED goes o, the green LED goes briey on when the nger is
accepted, then the yellow LED goes on again.
Move your 2nd nger over the sensor.
The yellow LED goes o, the green LED goes briey on when the nger is
accepted.
Turn the rotary handle clockwise in order to open the door.
bat
Access to the programming mode to change
the lock settings
Press „On / Enter, the yellow LED of the Readiness for entry/programming
icon goes on.
Type numbers 76 (program mode), the yellow LED goes o.
Press „On / Enter“ and enter the valid Pincode.
When a valid Pincode has been entered, the green LED goes on briey,
subsequently the yellow LED ashes. As long as the yellow „Readiness for
entry / programming“ LED is ashing, you are in the programming mode and
so you can perform various actions.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Burg-Wachter TRSE 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Burg-Wachter TRSE 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Burg-Wachter TRSE 10

Burg-Wachter TRSE 10 Gebruiksaanwijzing - Nederlands - 3 pagina's

Burg-Wachter TRSE 10 Gebruiksaanwijzing - Deutsch - 3 pagina's

Burg-Wachter TRSE 10 Gebruiksaanwijzing - Français - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info