678320
112
Verklein
Vergroot
Pagina terug
1/117
Pagina verder
This recovery procedure erases your data. Backing up regularly is highly recommended to avoid losing your
important data.
Do not connect the SD card to another TeraStation or your computer. The recovery process that involves using this
SD card is intended for this product only.
Recovery is performed by deleting the area for drive 1, setting up a new 100 GB (Basic Disk/Simple) area, and
then copying the Windows Storage Server image to this area.
Note: If there are system areas (or mirrored locations) on hard drives other than drive 1, be sure to delete
the system areas (or disable the mirrored locations) before performing the recovery procedure. If recovery is
performed without deleting these areas, Windows Storage Server may not run after recovery is performed.
If Windows Storage Server fails to run, turn off the TeraStation and perform the recovery procedure again
while all hard drives except for drive 1 (disk 0) are disconnected. After recovery is complete, reconnect the
disconnected drives, which will appear in “Disk Management as “Foreign. In “Disk Management, right-click
Foreign, select Import Foreign Disks, then right-click this area and click Reactivate Volume to rebuild the RAID
volume.
1 Turn off the TeraStation, following the procedure on the Turning the TeraStation On and Off section in
chapter 1.
2 Insert the SD card into the card reader (not included).
3 Connect the card reader to the TeraStation using a USB 3.0 or 2.0 port.
4 Set the boot mode switch to “USB, then press the power button.
This executes the recovery process.
5 The TeraStation shuts down automatically when the recovery process is complete.
6 Remove the card reader, set the boot mode switch to “HDD”, and press the power button.
When the initial setup is complete, the TeraStation will reboot into Windows Storage Server.
After the recovery process is completed, the TeraStation is set to the state below when running under default
settings.
• Drive 1
100 MB (EFI System partition)
100 GB (Basic Disk/Simple)
The remaining space is an unallocated area.
• Drives 2–6
The data on the drives cannot be viewed. They appear as a “Foreign in “Disk Management”.
Note: The data on the drives can be viewed by right-clicking the area displayed as “Foreign in “Disk Management”
and then selecting Import Foreign Disks.
Notes
Using an Omron UPS
The TeraStations LCD panel will not display information correctly when an Omron UPS is first connected. This is be-
cause the LCD panel control and the Omron UPS both use COM port 2. To resolve, refer to the Omrons user manual
and change its UPS communication port to a port other than COM 2, then restart the TeraStation.
111
112

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Buffalo TeraStation WS5600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Buffalo TeraStation WS5600 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Buffalo TeraStation WS5600

Buffalo TeraStation WS5600 Gebruiksaanwijzing - Deutsch - 122 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info