636474
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
3
System start-up
Logano G615 - We reserve the right to make technical changes without notice!
8
3 System start-up
This chapter explains how you prepare the system for
operation and how to commission the control panel and
the burner.
3.1 Making the system operational
You should check the following to prepare the system for
operation:
B Operating pressure of the system (Æ Chapter 3.2)
B Fuel is supplied and the main fuel shut-off valve is open
B Heating system emergency shutoff switch set to ON
Ask your heating contractor to show you where the fill
valve for your heating system (boiler return) is located.
3.2 Check and correct the operating
pressure
Your heating system must contain sufficient water to
ensure the functionality of your system.
If the operating pressure in the system is too low, fill make-
up water into your system (Æ Chapter 2.3, page 6).
Recently added fill or make-up water loses much of its
volume in the first few days because it releases gases.
With newly filled heating systems, initially check the
operating pressure daily and then in ever increasing
intervals.
Once the system is barely losing any volume, check the
operating pressure of the heating water once a month.
All factory default settings will have already been made by
the heating contractor when the system was first
commissioned.
3.2.1 Checking the operating pressure
The operating pressure must be at least 15 psi (1 bar).
B Read the current operating pressure and temperature
(°F (°C)) from the temperature/pressure gauge.
B If the operating pressure drops below 15 psi (1 bar),
top up heating water.
Fig. 3 Pressure/temperature gauge
3.2.2 Topping up with heating water and bleeding
the system
B Slowly fill the heating system via the on-site fill valve.
During filling, observe the display (pressure gauge).
B Once the desired operating pressure is reached, stop
the procedure.
B Bleed the heating system via the central purging
station.
B Top up with water again if the operating pressure drops
as a result of bleeding the system.
NOTICE: Risk of system damage due to
frequent topping up.
B If you need to add water frequently, the
heating system may be damaged by
corrosion and scale buildup depending on
the water quality.
B Bleed the heating system. If necessary,
top up heating water.
B Check the heating system for leaks and
the correct operation of the expansion
vessel.
B Notify your heating contractor if you find
you need to top up your heating system
frequently.
Air pockets may form in the heating system
from the fill or make-up water releasing
gases.
Let your local heating contractor show you
where the boiler fill and drain valve for
topping up and draining the heating water is
located on your heating system.
7 747 019 141-17.1RS
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Buderus Logano G615 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Buderus Logano G615 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Buderus Logano G615

Buderus Logano G615 Installatiehandleiding - English - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info