666477
8
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
GB - 8
Always wear eye protection during use!
The vibration emission level given in this information sheet has been measured in accordance with a
standardized test given in EN 60745 and may be used to compare one tool with another.
The vibration emission level will vary because of the ways in which a power tool can be used and may
increase above the level given in this information sheet. This could lead to a significant underestimate of
exposure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of exposure to vibration experienced during a given period of
work should also take into account the times when the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the exposure level over the total working period.
Suitable nails and staples:
You can use staples with a length up to 25 mm or nails with a length up to 32 mm with this electric staple gun.
Staples Nails
Bosch Typ 55 Bosch Typ 47
KWB Typ 055 KWB Typ 055
Novus C Typ 4 Novus E Typ J
Prebena Typ ES Prebena Typ J
Rapid Nr. 606 Rapid No. 8
Wolfcraft Typ 055 Wolfcraft Typ 062
Loading of staples (Fig. 3) or nails (Fig. 4)
Unplug the tool from the mains.
Push the staple feeder catch (7) at the back of the tool towards the magazine, and pull out the staple feeder
(5).
Warning: Once the staple or nail strip has been placed in the feeder, it will be spring-loaded. Hold the catch
firmly to prevent the feeder from suddenly being ejecting from the tool.
Place the staple strip (Fig. 3) or nail strip (Fig. 4) into the magazine.
Push the staple feeder (5) back to the front and secure by hitching the catch (7) behind the opening in the
housing.
Usage
The tool has double protection against inadvertent operation:
1. Switch the main switch (4) to the "Off" position (0) to lock the trigger (1).
2. The contact switch (6) ensures that the staple gun is only triggered on contact with a material surface.
Place the opening of the electric staple gun firmly onto the material and squeeze the trigger (1).
Additional pressure applied to the front of the tool will prevent recoil and increase the force applied to the nails
or staples. This is especially important for ensuring that the nail or staple is driven the whole way into a hard
surface.
Hammer-force Preselection
With the thumbwheel for hammer-force preselection (3), it is possible to preselect the required hammer force.
The required hammer force depends on the length of the staples or nails, and on the strength of the material.
Always test the selected hammer force on scrap material first.
The optimum hammer-force setting can be determined only by trial and error.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bruder Mannesmann 12420 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bruder Mannesmann 12420 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info