666580
1
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
Finishing Sander
item-no. 12330
CE
This tool is interference-suppressed
according to
CE EN 55014 + EN 61000
I N S T R U C T I O N - M A N U A L
Before using electric power-tools, please read and
understand the attached safety-instructions!
Additional safety-hints for impact-drill:
Always wear safety-goggles and a dust-mask
during your work with the finishing-sander.
Always secure the workpiece by clamps or else to
avoid slipping away.
Make sure, that there are no nails, screws or other
metal-parts in your workpiece, before starting your
job.
Always keep the holes in the baseplate clean from
dust.
Always connect a vacuum cleaner to the attached
adaptor during your work.
Description
1. front-handle
2. on-/off-switch
3. lock button
4. handle
5. sanding paper
6. base plate
7. paper clamp
8. adaptor for vacuum-cleaner
9. power cord
Technichal dates
voltage 230 V AC / 50 Hz
power input 150 W
sanding area 187 x 90 mm
sandpaper-size 230 x 90 mm
no. of vibrations 10.000 min
-1
sound pressure level (LPA) 80,0 dB(A)
sound power level (LWA) 93,0 dB(A)
vibration 2,5 m/s²
(acc. to EN 50144/13)
protection class / II
weight 1,29 kgs
Always wear safety-goggles, dust-mask and ear-
protection, when machine is in use!
Recommended nominal operating time: approx. 20
minutes under permanent load.
Rest after permanent operation: approx. 5-10
minutes.
Fastening of sanding-paper
Disconnect the tool from the power-supply
before changing sanding paper.
Open the paper-clamps on both sides of the
base-plate and remove the worn-out sanding-
paper.
Place a new sanding-paper on the base-plate
observing the holes in the sanding-paper fit to
the holes of the base-plate.
Bend the paper to the base-plate and fasten one
clamp first. Press the sanding-paper against the
base-plate, bend the other end and fasten
second clamp.
Attention: This finishing sander is not suit-
able for wet-sanding jobs.
Operation
To start the sander pull the trigger upwards
For continious operation press the lock-button at
the same time.
To stop the machine, pull the trigger again and
release.
Put the sander on the workpiece, as soon as the
motor has reached its maximum speed.
Let the sander slide smoothly over the surface of
your workpiece and do not apply too much
pressure. This will lead to reduce the speed, to
increase the wear of the sanding-paper and the
motor and to an uneven surface.
Stop the sander only after having lifted from the
workpiece.
Do not use the sander without sanding-paper.
Do not cover the ventilation-slots by your hands,
in order to achieve adequate cooling of the
motor.
Maintenance
The sander has no need to be maintained.
Before cleaning the sander, be sure to
disconnect the machine from the power-supply.
Only use a dry brush or cloth for cleaning the
housing from sanding-dust.
Do not use any detergents, since they will attack
the plastic-housing and do not let any liquids
enter the inside of the machine.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bruder Mannesmann 12330 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bruder Mannesmann 12330 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info